10 square sprinklers daily maintenance and repair

With the progress of the times and the development of society, high-rise buildings have risen one by one. Faced with the ever-changing changes, the people’s level has generally risen. More and more cities are increasingly demanding for the greening of the city. Therefore, the construction and daily management of the garden are imminent. For gardeners, a 10-square-sprinkler truck can continuously solve the problem of landscaping and make them more accessible. The work is faster and more effective in improving work efficiency, so regular maintenance and repair of the 10 sprinklers outside of work are critical. Only with daily maintenance and repair can the sprinkler be better put into work.

1

1. Cleaning of the sprinkler chassis: First of all, every time we use the sprinkler, we use the 20-minute work to clean the chassis of the sprinkler. It is well known that the chassis closest to the ground must have been muddled by mud. Therefore, before carrying out cleaning of other components, we must first perform a thorough cleaning of the chassis of the 10-way sprinkler. After a day's watering work, the front and rear wheel hubs of the 10-square-spray truck are covered with yellow mud and small sandstone. At the same time, it is necessary to use a high-pressure water gun to put it under the hub plate when cleaning. The direction of the high-pressure water jet is toward the direction of the hub plate. This can effectively remove the adhesion on the hub plate. Therefore, the maintenance of the daily chassis is more important because of the chassis of a car. Performance is inextricably linked to the safety, economy, failure rate, etc. of the car, so the daily cleaning of the chassis is very important

2. Clean the surface of the sprinkler: With the sprinkler of the day, its body must have a lot of mud and dust, so we wipe the car body after work. By cleaning the body, one side can be a new look for the car. On the other hand, it is to prevent the car from being deposited on the surface of the car due to prolonged accumulation of dust, mud, and the like. We all know that the varnish on the car body not only has a reflective effect, but also plays a role of security protection in the night environment. It also plays a role in controlling the rust of the car body, so daily car body cleaning is also very important.

3. In routine shifts, do daily inspections, clean the oil, neatly place the pipes, clean the site, check the holes or mouths for clogging, and clean them in time if they are clogged. Make a daily checklist registration. If the vehicle is not used for a long time or stored in winter, the remaining water in the tank, the pump and the pipeline should be drained. When it is stored, it should be parked in the carport and wipe clean to avoid exposure to rain and rain.

The above points are summarized as the daily maintenance and maintenance of the 10 party sprinkler . We only use daily inspections and daily maintenance to make the 10 party sprinkler better use and use, as long as the daily inspection work is well done. Our daily sprinkler trucks can be better used in practice.



Portable Potato Grinder

Portable Potato Grinder,Electric Potato Masher,Oxo Potato Masher,Mash Potato Masher

Hunan Xinta Machinery Manufacturing Co., Ltd. , https://www.china-agricultural-product.com