15000n Electric Linear Actuator Motor Linear Cylinder

Model NO.: DTI/1500/1000/M60
Trademark: X-ing
Specification: 200*96*105 (cm)
Origin: China
Model NO.: DTI/1500/1000/M60
Trademark: X-ing
Specification: 200*96*105 (cm)
Origin: China
Technical parameters:
model  thrust speed push distance motor model
700 1500 M60 90 Y90L-4

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:
NO. Type Trust
(kg)
Route
(mm)
Speed
(mm/s)
Motor 380(V) Le(mm) contour dimension
(L*W*H)mm 
 
(weight)
(kg) 
Type Power
(w)
Revolution
(T/Min)
Electricity
(A)
LeMin LeMax
1 25-20-I 25 200 48 AO25024 40 1400 0.23 369 569 580*125*118 7.5
2 25-20-II 25 200 96 AO25022 60 2800 0.23 369 569 580*125*118 7.5
3 100-40-I 100 400 42 AO5624 120 1400 0.47 640 1040 858*152*206 23
4 100-40-II 100 400 84 AO5622 180 2800 0.52 640 1040 858*152*206 23
5 300-50-I 300 500 42 AO6334 370 1400 1.12 745 1245 998*170*226 35
6 300-50-II 300 500 84 AO6332 550 2800 1.38 745 1245 998*170*226 35
7 500-50-I 500 500 50 AO7134 750 1400 2.02 778 1278 1098*190*226.5 52
8 500-50-II 500 500 100 AO7132 1100 2800 2.6 778 1278 1098*190*226.5 52
9 700-60-I 700 600 50 AO7134 750 1400 2.02 803 1343 1193*200*279 63
10 700-60-II 700 600 100 AO7132 1100 2800 2.6 803 1343 1193*200*279 63
11 1000-60-I 1000 600 50 JO2-21-4 1100 1400 2.68 883 1483 1260*204*271 75
12 1000-60-II 1000 600 100 JO2-21-2 1500 2860 3.24 883 1483 1260*204*271 75
13 1600-80-I 1600 800 50 JO2-31-4 2200 1400 4.9 1063 1863 1535*302*330  
14 1600-80-II 1600 800 100 JO2-31-2 3000 2860 8.06 1063 1863 1535*302*330  

Model# introduction:
15000n Electric Linear Actuator Motor Linear Cylinder

Structure drawing:
15000n Electric Linear Actuator Motor Linear Cylinder
15000n Electric Linear Actuator Motor Linear Cylinder
15000n Electric Linear Actuator Motor Linear Cylinder

OUR WORKSHOP
15000n Electric Linear Actuator Motor Linear Cylinder

OUR SALES TEAM
15000n Electric Linear Actuator Motor Linear Cylinder

Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!
Technical parameters:
model  thrust speed push distance motor model
700 1500 M60 90 Y90L-4

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:
NO. Type Trust
(kg)
Route
(mm)
Speed
(mm/s)
Motor 380(V) Le(mm) contour dimension
(L*W*H)mm 
 
(weight)
(kg) 
Type Power
(w)
Revolution
(T/Min)
Electricity
(A)
LeMin LeMax
1 25-20-I 25 200 48 AO25024 40 1400 0.23 369 569 580*125*118 7.5
2 25-20-II 25 200 96 AO25022 60 2800 0.23 369 569 580*125*118 7.5
3 100-40-I 100 400 42 AO5624 120 1400 0.47 640 1040 858*152*206 23
4 100-40-II 100 400 84 AO5622 180 2800 0.52 640 1040 858*152*206 23
5 300-50-I 300 500 42 AO6334 370 1400 1.12 745 1245 998*170*226 35
6 300-50-II 300 500 84 AO6332 550 2800 1.38 745 1245 998*170*226 35
7 500-50-I 500 500 50 AO7134 750 1400 2.02 778 1278 1098*190*226.5 52
8 500-50-II 500 500 100 AO7132 1100 2800 2.6 778 1278 1098*190*226.5 52
9 700-60-I 700 600 50 AO7134 750 1400 2.02 803 1343 1193*200*279 63
10 700-60-II 700 600 100 AO7132 1100 2800 2.6 803 1343 1193*200*279 63
11 1000-60-I 1000 600 50 JO2-21-4 1100 1400 2.68 883 1483 1260*204*271 75
12 1000-60-II 1000 600 100 JO2-21-2 1500 2860 3.24 883 1483 1260*204*271 75
13 1600-80-I 1600 800 50 JO2-31-4 2200 1400 4.9 1063 1863 1535*302*330  
14 1600-80-II 1600 800 100 JO2-31-2 3000 2860 8.06 1063 1863 1535*302*330  

Model# introduction:
15000n Electric Linear Actuator Motor Linear Cylinder

Structure drawing:
15000n Electric Linear Actuator Motor Linear Cylinder
15000n Electric Linear Actuator Motor Linear Cylinder
15000n Electric Linear Actuator Motor Linear Cylinder

OUR WORKSHOP
15000n Electric Linear Actuator Motor Linear Cylinder

OUR SALES TEAM
15000n Electric Linear Actuator Motor Linear Cylinder

Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!

Compound Fertilizer Production Lline

Fertilizer Making Line,Drum Granulator,Fertilizer Granulation Process

Blender&Mixing Machine Mixing Machine Co., Ltd. , http://www.nsdryingmachine.com