200WOG Brass Gate Valve with red and white handlewheel  Product name: 200WOG Brass Gate Valve with red and white handlewheel Description: Material Brass forged body,brass bonnet, brass stem, brass packing gland nut,brass wedge disc and cast iron handwheel. Brass can be CuZn39Pb3,CZ121,CZ122,C37710,CW614N,CW617N,DZR BRASS, etc. Surface Natural brass Size 1/2" to 2" (DN15 to DN50) Testing Pressure 100% tested with 0.6MPa - 0.8MPa by air. Samples Time 1) 2 days - For our existing samples for reference 2) 15 days - If new size, need make the new mould OEM Acceptable  Yes Production Capacity 100,000 pcs each month Packing Details Poly bag, inner box, out carton and pallet. Payment Term T/T ,L/C,,D/P,D/A,PAYPAL,WESTERN UNION Delivery Time 20 days to 40 days after confirming the order Minimum Order Quantity 1000-3000 Pieces Nox Sensor 12V For CUMMINS Car
Nox Sensor 12V For CUMMINS Car,Automobile sensor Vehicle accessories Cummins 12V Nox sensor is suitable for Cummins tail gas treatment.
Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.
The effects of Nox sensor damage are as follows:
1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.
2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.
3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,.
Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.
Nox Sensor 12V For CUMMINS Car,Cummins Engine Parts 12V Nox Sensor,Vehicle Parts Cummins 12V Nox Sensor,Car Accessories Cummins 12 V Nox Sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Packaging & Shipping:
Inspection:Â Each cargo will be inspected before shipping. The third-party inspection company is acceptable. Like SGS, ASIA inspection, etc.
For more information, pls be free to contact with us any time.
200wog Brass Gate Valve with Red and White Handlewheel (BW-G03)
Â