Brass Magnetic Lockable Ball Valve with Strainer

Brass Magnetic Strainer Lockable Ball Valve/Brass Magnetic Lockable Ball Valve with Filter/Brass Magnetic Lockable Ball Valve/Brass Anti-theft Ball Valve consists of forged brass body, chromed brass or stainless steel ball, magnetic zinc lock and stainless steel strainer/filter.

Size: 1/2"~2"(DN15-DN50)

Standard: BS1400

Material: Brass (CZ122, CuZn39Pb3 and so on)

Technical Specification:

Working pressure: 1.6Mpa

Tested Pressure: 2.0Mpa

Working medium: Water, oil, gas

Working temperature: -20° C≤ T≤ 150° C

Thread standard: ISO228

Lockable ball valve is a tamper-proof valve that is designed with a double-locking system, made of brass. Once secured, a special key is needed to unlock the valve.

We also have many other lockable ball valves for your selection.

Drawings as follows:

In order to quote you the best price timely, please kindly provide the following information in your inquiry:

1) Product details: dimensions

2) Order quantity

3) Attached drawings if customized

4) Any special packing, delivering or other requirements

If you are not sure about any specifics of the product you need, please feel free to contact with us and we are more than happy to help.

Air Source Heat Pump
Cooling capacity: 20kW-50kW

Characteristics:
1.Structure. Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2.Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
3.Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
4.Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material.
5.Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill.
6.Desuperheater: High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional).
7.Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset. The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
8.Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors. Water pump (8kW-30kW), differential pressure switch. Expansion tank (8kW-30kW)
9.Electric panel. Consists of:
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10.Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed
Stainless steel covering
Remote condenser
Tube in tube heat exchanger

Water circuit electric heater

Air Source Heat Pump

Air Source Heat Pump,Hot Water Air Source Heat Pump,Heating Air Source Heat Pump,Scroll Air Source Heat Pump

Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com