The economical CNC machine tool is a simple CNC machine tool. The machine tool does not have the automatic tool radius compensation function. In order to meet the requirements of the wheel machining process, a round cup knife must be used to ensure the inner and outer webs of the wheel and the rim and tread. Claim. Among them, the NC machining control program needs to be programmed according to the equidistant line of the car profile, and the following points need to be noted: (1) In order to avoid the curvature of the tool and the contour of the car, the radius of curvature of the tool must be smaller than the radius of curvature of each part of the wheel. (2) The shape of the wheel is often angular, and the coordinates of the center of the tool should be offset. (3) The tool compensation is the same point, the deviation of a certain knife relative to the reference knife in the X and Z aspects, the reference knife does not set the tool compensation, if the tool compensation is also for its own fine adjustment. (4) The program origin can be any point on the Z coordinate axis, but for programming and tooling convenience, the program origin often selects the center of rotation of the right end of the wheel. (5) The tool point is also arbitrary, but in order to reduce the tool idle time and improve the productivity, the position close to the wheel is generally selected, but the distance between the wheel and the tool holder should ensure that the tool holder has enough rotary tool change space. (6) When writing the program, the coordinate values ​​in the X direction are programmed with the diameter value. By taking the above measures, several batches of processed wheels are inspected, and the size, positional accuracy and surface roughness of the products are in full compliance with the technical requirements of the drawings. Therefore, this processing method is a feasible method for economical CNC machine tools to process small batches and technically demanding wheels. (Finish)
Compared with other crushers, the single shaft crusher has a larger crushing chamber. Widely used in wood chips, straw, straw and other fiber materials crushing.
The motor and rotor are installed in the same heavy-duty base, using coupling direct drive, rotor passes accurate dynamic balancing test, the hammers are arranged symmetrically. Hammer Mill Crusher,Wood Hammer Mill Grinder,Wood Crusher Machine,Single Shaft Hammer Mill Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachinery.com
Unique Feeding Design, the feeding inlet is made on the top of the machine to make feeding easily.
The shell is welded by steel plate, the site in the crush room which connects to the materials all use the wearable and commutative parts and double wear plate.
Hammers adopts special abrasion resistent treatment technology, extend its lifetime greatly.