Extra Heavy Duty Top and Bottom Feed Lockstitch Sewing Machine

October 01, 2022

Model NO.: FX-733
Trademark: FOXSEW
Transport Package: Cartons
Specification: CE
Origin: Zhejiang, China
HS Code: 8452
Extra Heavy Duty Top and Bottom Feed Lockstitch Sewing Machine FX-733

For stitching extra heavy-weight materials. Designed for such operations and products as safety and logging belts, cargo slings, buffing wheels, tents, sails, harnesses, tarpaulins and covers, fabric structures, construction barriers, parachutes, balloons, industrial bags, boot stitching, book binding
FEATURES:
Synchronized upper and lower feeding mechanism assures uniform stitching
Alternating presser feet
Steel insert for take-up hinge
Reverse stitching - hand or foot operated
Stitch regulator - hand or foot operated
Presser foot lift - hand or foot operated
1-1/4 inch presser foot lift
Two row feeder
Two stitches to the inch
Stitches per minute - 550
Extra large, long-beak oscillating shuttle, hook and bobbin
Belt guardExtra Heavy Duty Top and Bottom Feed Lockstitch Sewing Machine
Model FX-733
Max. Sewing Speed 700 r.p.m
Stitch Length 0-15mm
Presser foot lift By hand: 29 mm   By knee: 32 mm
Needle Size SMx1000 27#
Shuttle Hook KSP7-31
Lubrication Manual
Motor 550W Clutch Motor 1400 r.p.m

24 Axis Production Line for winding machine

Winding machine fault classification is nothing more than: electrical, mechanical, transmission, pneumatic (if any) these kinds, of which the electrical part is divided into strong, weak, and winding machine manufacturers generally in its CNC system design, use and maintenance, have considered to vulnerable, fault prone parts to give an alarm, alarm circuit work, on the one hand, in the display or operation panel to give sound On the other hand, it sends out protective instructions. Make the system power off or stop working, in order to ensure safety and prevent fault expansion.

Reset method of whole machine

In general, the winding machine can remove the fault by hardware reset or switch system power supply in turn due to the instantaneous fault. If the system working storage area is confused due to unstable voltage, unplug the circuit board or the rectifier switch power supply is under voltage, the system must be initialized and cleared. Before clearing, the current data backup record shall be paid attention to, If the fault can not be eliminated after reset initialization, the hardware replacement diagnosis shall be conducted.

Preparation of commissioning procedure

The basis for determining whether the system function of the whole machine is in good condition is to compile a reasonable program and run successfully. Some setting errors of winding parameters may cause system failure or some function invalidity. Sometimes, the fault shutdown caused by user program error can be checked by compiling trial operation procedure to correct the user program error to ensure its normal operation.

Use all adjustable parts well

For example, the adjustment of adjustable parts such as winding tension, screen voltage, starting position of line setting is easy to be simplified but effective in maintenance. By adjusting the adjustable parts, some harmless faults can be corrected. If a winding machine has been used for many years in an enterprise, the screen of its system display screen is dark and normal after regulating the screen power supply voltage.

24 Axis Production Line for winding machine,winding machinery production line,automatic production line

SUZHOU DEGU MACHINERY CO.,LTD , https://www.deguwindingmachine.com