Water (20ºC)   6~150000L/h Air (101.3kPa 20ºC) 0.05~4000m3/h 1.5 grade 1.0 grade DN15~DN50  PN4.0MPa (25MPa for special type) DN80~DN100    PN1.6MPa (16MPa for special type) Sandard Type: -80ºC~+220ºC Hgh temperature type: 400ºC Lning PTFE type: ≤85ºC Pinter type: -40ºC~+120ºC Eectric remote transmission type: -30~+65ºC, DN15: ≤5mPa.s (H15.1~H15.3): ≤30mPa.s (H15.4~H15.9) DN25: ≤250mPa.s DN50~DN150: ≤300mPa.s Idication range for instantaneous flow rate: 0~50000. Idication range for accumulative flow rate: 0~99999999. Sandard signal: two-wire 4~20mA Pulse signal: minimum interval is 50ms  Instantaneous flow rate alarm for upper limit or lower limit.   Sandard type: open-collector output (MAX100mA, 30VDC Inner impedance 100Ω. Secial type: relay output (The maximum contact capacity is 5A AC250V) Sandard type: DC24V (DC10.8V~DC36V) AC type: AC220V (AC85V~AC265V) Sandard type: DIN2501 flange    IP6516, explosion-proof sign: Intrinsic safety type: ExiaIICT3~6    Mobile Pneumatic Marking Machine Mobile Pneumatic Marking Machine,Wholesale Mobile Pneumatic Marking Machine,Direct-Selling Mobile Metal Engraving Machine,Pneumatic Engraving Machine Jinan Luyue CNC Equipment Co., Ltd. , https://www.sdlycnc.com
The standard variable area flowmeter is composed of a measuring tube and a on-site indicator. On-site indicator can be optional to install an additional electric component, which is suitable to measure liquid and gas.
This variable area flowmeter adopts the variable-area measuring principle and the measuring component is composed of a conical measuring tube and a floater. The floater can move up and down freely in the conical measuring tube, to change the flow area in the tube. The vertical position of the floater in the conical measuring tube will change with the change of flow, the floater position will be transmitted to the indicator dial via magnetic transmission system, and it can indicate the flow value on site, and also output signal to realize remote display and control.
This variable area flowmeter can be widely used in the flow measuring process of complicated and severe environmental conditions such as petroleum, chemical engineering, power generation, pharmaceuticals, food and water treatment industries, as well as various medium conditions.
Specifications
Measuring range
Measuring range ratio
10:1 (20:1 for special type)
Accuracy
Working Pressure
Jacket pressure rating
1.6MPa
Media Temperature
Ambient Temperature
Media Viscosity
Liquid crystal display (LCD)
Output
Alarm output
Power supply
Connection type
Secial type: The flange standard should be provided by the user.   Â
Treaded connection type: DIN11851 or designated by the user
Electrical Interface
M20×1.5, PG11,1/2″NPT15
Protection Grade
Flame-proof type: ExdIIBT3~6
Mobile pneumatic marking machine is suitable for the workpiece is not easy to move to the table for marking, when in use the mobile marking machine head placed on the workpiece marking. On the basis of inheriting the original advantages, this machine has made many improvements in the applicability. It is more convenient to move when marking. The whole machine adopts aluminum base parts, which are lighter in weight, not easy to be deformed and of higher precision.
Mobile pneumatic marking machine guide rail is linear rolling guide rail, can achieve self-sealing, self-lubrication, high reliability, wear resistance, even if the use of more than 10 years, still can ensure the precision of marking; The preferred high performance configuration enables the mobile pneumatic marking machine to work in harsh environment without consumables, and the printed mark is beautiful and permanent. Marking machine stability and reliability, high degree of automation, simple operation.
Mobile pneumatic marking machine is currently widely used in automobile and motorcycle frame, large pipelines, shaped workpiece, heavy machinery, nameplate and various not easy to move the workpiece mark.
We are looking for agents for all kinds of models worldwide. We can also provide OEM service. Welcome the friends who are interested in our products to get in touch with us, hope we can have a chance to cooperate.
High Accuracy Mechanical Flow Meter in China
Model NO.: A+E-84F
Measuring Media: Liquid, Gas
Measuring Principle: Electrical Principles
Measurement Object: Closed Pipeline
Certification: ISO
Item: Variable Area Flow Meter
Working Pressure: 4.0 MPa
Temperature: 400 Degree (752f)
Connection: Flange
Measuring Range Ratio: 10:1 (20:1 for Special Type)
Material: Metal
Protection: IP65
Funtion: Hazardous Area
Display: Field Pointer
Output: Two Wire 4-20mA
Trademark: AEAD
Transport Package: Carboard Box
Origin: Shanghai
HS Code: 9026100000
High Accuracy Mechanical Flow Meter In China