Steel Sheet Pile, according to the different processing technology can be divided into: hot rolling / tensile steel Sheet Pile, cold bending steel sheet pile. Now because of the production conditions and the scale of the restrictions, the hot rolled steel sheet pile in the domestic no production line, the hot rolled steel sheet pile in our country are from abroad. Common hot rolled steel sheet piles manufacturer Hyundai Steel, Nippon Steel Mills, Japan's Sumitomo steel, Japan's JFE steel, and Europe and the United States parts manufacturers.
Photo of our Sheet Pile:
structure
Steel sheet pile cofferdam is a most commonly used sheet pile cofferdam. Steel sheet pile is with a lock of a type steel, the cross section is straight shaped, trough and Z, with various sizes and interlocking form. There is a common type of Larson, Lackawanna type etc..
The utility model has the advantages: high strength, easy to break into the hard soil layer; construction in deep water, when necessary and inclined support to become an inclosure. The waterproof performance is good, and can be composed of various shapes of cofferdam, and can be used for many times, so it is widely used.
In the construction of bridge used in open caisson cofferdam, it is widely. Tubular column foundation, pile foundation and the foundation of the cofferdam, etc..
The use of single wall enclosed cofferdam, cofferdam in the vertical and horizontal support, if necessary with the inclined support into a cage. Such as China Nanjing Yangtze River Bridge Foundation, had used steel sheet pile round cofferdam, the diameter of 21.9 meters, 36 meters long steel sheet pile, there are various sizes and interlocking form. To reach the bottom of underwater concrete strength requirements, pile cap and pier construction pumping, pumping design depth of 20 meters.
In the construction of hydraulic structures, the general construction area is very large, it is commonly used to make the construction of the cofferdam. It is a single connected to each other by many, each monomer is composed of many steel sheet pile, single middle filled with soil. The scope of the cofferdam retaining can be too large to be used to support the weir wall, so each monomer can alone to resist overturning and sliding and prevent the crack in the interlocking. Commonly used in the form of circular and next door.
1, steel sheet pile
2, on both sides of the joint structure
3, in the ground, the water constitutes a wall
classification
Sheet Pile Steel or Sheet Piling.
Steel sheet pile is a kind of edge with linkage device, and the linkage device can be freely combined in order to form a continuous steel structure.
temperature
Cold formed steel plate
The steel strip is continuously formed with Z shape, U shape or other shapes, and can be connected with each other through a building foundation which is connected with each other through a locking plate.
Civil engineering application of cold-formed steel's main products a with rolling and cold bending molding process for producing steel plate pile, the steel sheet pile piling machine (pressure) into the ground to make it connected to steel sheet pile wall for retaining soil or water. Commonly used cross section types are: U shape, Z shape and straight abdominal plate. Steel sheet pile suitable for soft foundation and underground water level is higher than that of the deep foundation pit supporting, construction is simple, the utility model has the advantages of is good sealing performance can be reused. Delivery status of steel sheet pile delivery length of 6m, 9m, 12M, 15m, can also be based on user requirements, the length of the processing, the maximum length of 24m. (if the user has special length requirements, can be in order to put forward) cold formed steel sheet pile to the actual weight of delivery, also can according to the theory of weight delivery. Steel sheet pile application of cold-formed steel sheet pile products in the application of civil engineering with construction convenient, quick progress, without the need for large construction equipment, is conducive to the characteristics of the seismic design and according to the specific conditions of the project, change the cold-formed steel sheet pile section shape and length, makes the structure design more economical and reasonable. In addition, through the optimization design of the section of the cold formed steel sheet pile, the quality coefficient of the product can be improved obviously, and the weight of the width of the pile wall is reduced, and the cost of the engineering cost is reduced.
Characteristic
1, deal with and solve a series of problems in the process of mining;
2, construction is simple, shorten the time limit for a project.
3, for the construction tasks, can reduce the requirements of space;
4, the use of steel sheet pile can provide the necessary security and (disaster relief and rescue) strong timeliness;
5, the use of steel sheet pile can be free from the constraints of the weather conditions;
6, in the process of using steel sheet pile, can simplify the examination of the material or system performance of complex procedures;
7, to ensure its adaptability, good compatibility, and can be repeated use.
8, can be recycled, save money.
Sheet Pile Concrete Sheet Pile,Larssen Sheet Pile,Steel Sheet Pile,Composite Sheet Pile Unisite Group Ltd. , https://www.shipsparts.nl
Product parameter:
Â
           SPECIFICATION OF LOW SPEED ELECTRIC CAR
1
Model
D503
2
Driving Type
Rear Drive
3
Overall Dimension L×W×H(mm)
2830×1320×1590
4
Body Structure
5 Doors and 3 Seats
5
Weight(Kg)
520
6
Wheel Base(mm)
1910
7
Front Tread(mm)
1075
8
Rear Tread(mm)
1015
9
Min. Ground Clearance (mm)
120
10
Maximum Speed(km/h)
35
11
One Charge Mileage
≥100
12
Maximum Climb Angle
10%
13
Charging Voltage (V)
220
14
Charge time (h)
6
15
Power consumption (kwh/100km)
8
16
Storeage Battery
80Ah/12V/Lead-acid Gel,  5 Pcs
17
Rated Power of Motor
DC, 1.0KW
18
Tyre
400-10
19
Spare tyre
400-10
20
Front/Rear Brake
Disc,Hydraulic
21
Aluminum rims
.
22
Cooling AC
.
Product features:
As a classic version of the upgrade, D503 product quality is no doubt, in the configuration of the new upgrade, but also fully consider the needs of users. If you need an easy to operate and reliable type four wheel electric vehicle, while D503 is a very good choice!
1, appearance
Shifeng D503 is independent of Shifeng group to create a classic small car body, full order mould, beautiful appearance, spacious interior, flexible and comfortable driving experience, products listed by the market's favor.
2, configuration
In humanized configuration, D503 increased the skylight and spare no effort, reverse image function, assembly intelligent voice alarm system, clear broadcast backing, high speed, medium speed and low speed tips, suggesting that vehicle anti-theft measures and open function, convenient use.
3, power
D503 is equipped with well-known brand maintenance free battery and intelligent motor controller, with strong power and reliable performance. The 60V1.0kW brushless DC motor with complete independent intellectual property rights can achieve reasonable matching and improve the performance of the whole vehicle. This model can be equipped with 60V/1.0kW high and low axle, low grade climbing powerful, high-grade flat road, fast speed, fast and convenient conversion.
4, features
D503 is the biggest characteristic of the steering wheel into the handle, the rear suspension adopts double trailing arm type independent suspension system, independent front suspension for Mcpherson type structure, balance performance is good, safe and comfortable.
Overseas sales
1,Being No.1 for 15 years in China, for the production and sales of Agricultural Vehicles.
2,Being No.1 for 17 years in Chinese Agricultural Machinery industry, for the running Turnover and Profit.
3,Being No.1 in China, for the production and sales of Tractor, Single Cylinder Diesel Engine.
4,Most patents in Chinese Agricultural Machinery industry.
5,With 1800 Dealers in China and the world, most dealers cooperated for more than 15 years.
6,With 2000 Suppliers all over the world, built up the Strategic Partnership.
7,Casting &Â Foundry, Punching Pressing, Welding, Painting and Assembling Technology &Â Equipment is the best in Chinese same industry.
8,Shifeng is available to produce &Â sell 1.2 million units Agricultrual Vehicles, 1Â million units Agricultural Equipment, 120,000LCV trucks &Â Electric Car,120,000 tons Nylon Chemical Fiber &Â Tires, with the related supporting from Technology, Human Resource, Equipment &Â partners.
Our service
Pre-Sales Service
1. Inquiry and consulting support.
2. Sample testing support.
3.View our Factory.
After-Sales Service
1.Training how to install the machine, training how to use,maintain and repair the machine.
2.Engineers available to service machinery overseas.
FAQ
Q1.Are you manufacturer or trader?
We "Shandong Shifeng Group Co.,Ltd" located in "Shandong Province China  established on 18th May, 1993.
Q2.What is your terms of payment?
A:T/T 30% as deposit,and &70% before delivery.we will show you the photos of the products and packages before you pay the balance.
Q3.What your terms of delivery?
A:EXW,FOB,CFR,CIF,DAF.
Q4.How about your delivery time?
A:Generally,it will take about 14 days after receipt of deposit payment.The specific delivery time depends on the items and the quantity of your order.
Q5.Are you interested in dealership with local company?
A:Yes,we are quite interested in this business.we'd like to cooperate with some local partner to sell more products in local market and supply better service.
Q6.What is your warranty policy?
A:We can supply two years warranty for our products.We will provide parts as free within warranty.We can send engineer to customer place if big quality problem.We can provide internet or calling service at any time.
Q7.Do you test all your products before delivery?
A:Yes,we have 100% products test and complete quality control system defore delivery.
Q8.How do you make our business long-term and good relationship?
A:1.We keep good quality,competitive price and efficient service to ensure our customers benefit;
2.We protect the benefit of dealer or agent,in specifical period and region.
Â
Hot Sell High Quality and Safe Comfortable Electric Car/Electric Car/Electric Vehicle
Model NO.: D503
Model: D503
Vehicle Size: 2830×1320×1590
Wheelbase: 1910 mm
Maximum Speed: < 35 Km/H
Weight (Kg): 520
Body Structure: 5 Doors and 3 Seats
Min. Ground Clearance (mm): 120
One Charge Mileage: Above 100
Maximum Climb Angle: 10%
Trademark: SHIFENG
Transport Package: According to Customer′s Requirement
Specification: 2830× 1320× 1590
Origin: Gaotang, Country, Shandong, Provice
HS Code: 8703900010
Hot sell high quality and safe comfortable electric car D503