Electric Wire Stripper
M-1 Output Cover Type
Power supply 230V-50HZ,2.2KW
Measurement L620*W600*H840
Weight 100KG
Daily Output 400-1000KG
Processing diameter at 1-45mm cable wire
Wire stripping capacity 35 meter/minute
Steel rolls 4sets.
Blades 15 pieces
Slots 11 pieces
We supply Cable Stripping Machine such as automatic cable stripper, Rubber Cable Stripper and so on.
We come up with this wire stripper that is fast and user friendly. This wire stripper will cut 90 % of your time in stripping your wire.
Make sure the cables/wires`diameter are similar with the feeding slots ,
large cables/wires in large feeding slots,small cables/wires in small feeding slots,flat
Cable Stripping Machine Cable Stripping Machine, Scrap Cable Stripping Machine, Electric Cable Stripping Machine, Copper Cable Stripping Machine,Automatic Cable Stripper,Rubber Cable Stripper TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com
The links to be noted and the measures to be taken are as follows:
(1)Before processing, the wire of the wire-cutting machine tool must be inspected. The tension of the electrode wire also has a great influence on the surface quality of the machined workpiece. The workpiece with high surface quality requirements should be increased as much as possible under the premise of continuous wire. Silk tension.
(2) The medium wire cutting machine generally uses water-based working fluid. The spark discharge must be carried out in a liquid medium with certain insulating properties. The insulating properties of the working fluid can compress the discharge channel after breakdown, thus confining the spark discharge within a small channel radius, forming instantaneous and local high temperatures to melt gas. After the metal is discharged, the discharge gap is quickly restored to the insulating state. If the insulation performance is too low, the working fluid becomes an electrical conductor and spark discharge cannot be formed. If the insulating performance is too high, the discharge gap is small, the chip removal is difficult, and the cutting speed is reduced. Before processing, different types of water bases should be selected according to different process conditions. In addition, the conditions related to the coolant must be checked to check the fluid volume and the degree of contamination, so as to ensure that the insulating performance, washing performance, and cooling performance of the hydraulic fluid are satisfactory.
(3) The wear of the conductive block must be checked. In the wire-cutting wire cutting machine in general, after processing for 50 to 80 hours, it is necessary to consider changing the cutting position of the conductive block or replacing the conductive block. When there is dirt, it needs to be cleaned with the washing liquid. It must be noted that when the position of the conductive block is changed or the conductive block is replaced, the perpendicularity of the electrode wire must be re-calibrated to ensure the precision and surface quality of the machined workpiece.
(4) Check the rotation of the guide wheel. If the rotation is not good, it should be replaced. The damage of the upper and lower nozzles and the degree of contamination must be carefully checked. Dirty matters should be removed with the cleaning fluid. When there is damage, it must be replaced in time. The condition of the inner wire of the wire storage drum should also be inspected frequently. If the wire loss is too large, it will affect the machining accuracy and surface quality, and it needs to be replaced in time. In addition, the poor condition of the conductive block, the guide roller, and the upper and lower nozzles also causes the vibration of the wire electrode. Even if the machined surface can perform good discharge at this time, due to the vibration of the wire electrode, the processed surface is likely to produce peaks or stripes. Eventually cause the surface roughness of the workpiece to deteriorate.
(5) Maintain a stable power supply voltage. Unstable power supply voltage will cause the neutral wire electrode and the workpiece to be unstable at both ends, which will cause unstable breakdown discharge process and affect the surface quality of the workpiece.
The recovered copper or aluminium,can be sold to a smelting plant.Remember to watch the price of copper daily this will maximize your revenue.
This machine Specifications:
*It is compact,yet easy of access,practicable and easy to handle,has unique price/performance ratio.
*It has reliable performance,easy to move, place and install.
*This cable stripper is simple to operate without the need for constant adjustment to suit different material sizes.
* Proprietary hardened tool steel blades.
*It is s simple yet efficient machine and requires very little service and maintenance.Only need blade changing and lubrication if necessary.
*It is a totally-enclosed type machine,has side guards cover the pulley and belt system,ensure the operator`s safety.
Recovers the Conductor Material from Cable and Wire.
How to maintain the wire-cut EDM machine?
The wire-cut WEDM machine is a high-precision machine tool. Maintenance of the machine tool is very important because the high precision and high quality of the machined workpiece are directly established on the basis of the high precision of the machine tool. Therefore, the machine tool must be inspected before each machining operation. The working conditions can provide the conditions for obtaining high quality machined parts.