Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

October 23, 2018

Type: Single Seater
Model No.: 100X
Trim: Stainless Steel
Seat: Ss / Bronze
Pipes/Tubes: Copper or Stainless Steel
Coating: Epoxy Resin Coated to 300 Micro
Body: Ductile Iron, Stainless Steel
Diaphgram: Nylon+EPDM/Viton
Seal Rings: NBR/EPDM/Viton
Trademark: Walter
Transport Package: Bubble Bags and Wooden Case
Specification: Pn10/16/25
Origin: Suzhou, Jiangsu
HS Code: 8481801090
Type: Single Seater
Model No.: 100X
Trim: Stainless Steel
Seat: Ss / Bronze
Pipes/Tubes: Copper or Stainless Steel
Coating: Epoxy Resin Coated to 300 Micro
Body: Ductile Iron, Stainless Steel
Diaphgram: Nylon+EPDM/Viton
Seal Rings: NBR/EPDM/Viton
Trademark: Walter
Transport Package: Bubble Bags and Wooden Case
Specification: Pn10/16/25
Origin: Suzhou, Jiangsu
HS Code: 8481801090
Float Control Valve or Flow Level Control Valve is a non-modulating valve, that accurately controls the liquid level in water tanks.,

1. Body/Bonnet: GGG50 or Stainless Steel

2. Spring: SS304

3. Stem: SS / Bronze

4. Disc Retainer: DI/SS/Bronze

5. Seat: SS/Brass/Bronze

6. Seal Rings: NBR/EPDM/Viton

7. Pilot: Stainless Steel or Brass

8. Pipe or Tubes: Coppe or Stainless Steel

9. Working Pressure: PN10/16/25

10. Connection: Flanged acc. to EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129

11. Epoxy Resin Coated to 300 microns inside & outside

12. Anti-cavitation Solution
Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve



Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

  Float Control Valve or Flow Level Control Valve is a non-modulating valve, that accurately controls the liquid level in water tanks.,

1. Body/Bonnet: GGG50 or Stainless Steel

2. Spring: SS304

3. Stem: SS / Bronze

4. Disc Retainer: DI/SS/Bronze

5. Seat: SS/Brass/Bronze

6. Seal Rings: NBR/EPDM/Viton

7. Pilot: Stainless Steel or Brass

8. Pipe or Tubes: Coppe or Stainless Steel

9. Working Pressure: PN10/16/25

10. Connection: Flanged acc. to EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129

11. Epoxy Resin Coated to 300 microns inside & outside

12. Anti-cavitation Solution
Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve



Mechanical Ball Float Water Level Exhaust Manual Directional Control Valve

 

Injection Machine Water Chiller

Application
Almost of our Water Chiller can be used for plastic industry cooling, Both Air Cooled Water Chiller and Water Cooled Chiller is ok, so this depends on your choice and the local ambient condition. 
Feature
1) Chilled outlet water temperature range from 5°C to 35°C
2) Environmental friendly refrigerant R407c,R134a,R410a
3) Famous brand scroll Copeland/Danfoss Compressor
4) Built-in water pump and water tank
5) Shell and tube or tank with coil evaporator available
6) Precise microcomputer control system
Injection machine water chiller

Injection Machine Water Chiller

Injection Machine Water Chiller,Plastic Injection Machine Chiller,Economical Injection Machine Water Chiller,Customized Injection Machine Water Chiller

Jinan Amrta Air Conditioning Co.,Ltd , http://www.amrtaac.com