Manual Saw Blade Pipe Cutting Machine 1. Servo motor driving feeding system with AC servo motor / C5 level ball guide screw and linear guide rail, fast, stable and accurate. Maximum feeding speed of 1000mm / s and feeding length of 1000m, multiple feed. Pipe Cutting Machine Blade,Manual Pipe Cutting Machine,Manual Saw Pipe Cutting Machine,Pipe Cutting Machine Saw Blade GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.ctkcutting.com
In October, the total investment in related industries downstream of construction machinery increased by 17.69% year-on-year, and the growth rate increased by 0.64 percentage points from September. Among them, railway investment continued to increase substantially in the same month last year, reaching 82.2%. The recovery of downstream investment and peak season effect led to an increase in the number of hours spent on equipment. The Komatsu excavator utilization hours in October rose by 9.41% month-on-month. It is believed that the recovery of fixed investment has been gradually transmitted to the demand side of equipment. As downstream investment stabilizes, there is less room for sales decline in construction machinery, and rising equipment utilization also reflects that the demand side will not deteriorate. Considering that November has already entered the winter that is not conducive to construction, it is expected that the sales volume in November will only grow slightly.
2. Gearbox driving Saw Blade, is produced by casting and processing by CNC machining center, which is stronger and more accurate. Inside, the core components of gearbox are imported from Taiwan, which produced with advanced milling and vacuum heat-treatment, so they are precise and long lifetime, lower noise and high transmission efficiency. Saw blade can work stable and process in long lifetime.
3.The special designed clamp has strong clamping capacity, firm, safe and reliable.
4. Automatic circulation of coolant ensures smooth cutting surface and long service life of saw blade.
5. Great Clamping device of pipes can decrease pipes vibration during working to extend saw blade lifetime and guarantee feeding speed with the Patent No.ZL 2009 1 0039079.8
6. Servo tail processing device, when the material is more than 100mm left, automatically cut the tail, avoiding that after the former automatic pipe cutting machine has finished cutting, the tail should be cut again separately, saving material and labor and improving production efficiency. Min tail length is 20-30mm.
7. Stop gauge is equipped, that used as keeping alignment of pipes and providing original point for system in order to improve preparing time and avoid the mistake of feeding by manual.
8. Control system is developed by Chittak that is with rich database, and can be updated. Easy operate.
9. It is equipped with an automatic detection and alarm information system, which is convenient for users to troubleshoot.
10.Using Mitsubishi PLC controller, the circuit is simple and the maintenance is simple, response is fast.
11.Can set 5 different cutting lengths for a single material to reduce waste of surplus materials.
12.Length digital display and easy setting and operating in control system.
13.The model can be updated with automatic loading system that can greatly improve efficiency and save the labor cost. Meanwhile, it can be equipped with conveyor belt to transport the finished goods to next machine process. All updated functions can be controlled by Cutting Machine System.