Ultrasonic Heat Meters(Ultrasonic Calorimeters) are kind of energy meters measuring the flow rate and heat exchange through the ultrasonic method. The ultrasonic Heat Meters get the heat consumption value through the temperature sensors. The ultrasonic heat meters are mechatronic product based on the microprocessor and high precision sensors. Comparing with the Water Meters, electornic meters and gas meters, the ultrasonic heat meters need much more complicated designs and higher technology demand. Ultrasonic heat meters is kind of high technology products with mechanism, electronics and information technology. At present, the ultrasonic heat meters are more often used in many industries,through Ultrasonic Heat Metering,can accurate to do what you want.
Ultrasonic Heat Meters Ultrasonic Heat Meters,Ultrasonic Digital Meters,Ultrasonic Calorimeters,Ultrasonic Heat Metering Berggruen Technology Co.,Ltd , https://www.meter-technology.com
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
Ultrasonic heat meters are consisting of flow rate sensor, temperature sensor and calculator, which has the advantages in high tense construction and easy installation. We adopt the quality ceramic transducers which guarantee the high accuracy and stability of the ultrasonic heat meters. The ultrasonic heat meters have the characteristics as following: non mechanical movement, non wear and tear, non influence from the bad quality water and low cost maintenance; horizontal or vertical installation; installed in inlet water tube or return water tube according to customers` request (should be chosen in advance); adding the RS485 according to customers` demand to reach the aim of remote meter reading in order to be centralized management.
PP PE Direct From Factory Single Nitriding Extruder Screw Barrel
HS Code: 84779000
HS Code: 84779000
Production DescriptionÂ
Â
Â
Â