Characteristic of zinc die casting products:

1. High specific density, more strength than plastic injection molding.

2. Good casting performance, Producing complex shape and Thin-walled precision die casting parts,
the surface of Zinc Die Casting part is smooth.

3. Easy do the surface treatment: Plating, powder coating, Painting.

4. Do not attract iron when Melt and die casting, do not corrosion Zinc Die Casting Mould and Non-stick mold.

5. Have good room temperature mechanical properties and wear resistance.

6. Low melting point, Melts at 385℃, more easily forming than aluminum alloy die-casting molding.

M Domestic commonly used die-casting zinc alloy material performance:

The traditional die-casting zinc alloy: No.2, No.3, No.5, No.7. ZA8 Currently the most widely used is zinc alloy No.3.

The application of commonly used zinc alloy:

No.2: It is used to those mechanical fittings that have special need in mechanical capability, and need high rigidity and normal dimension and precision.

No.3: Good liquidity and mechanical properties, and the best combination of mechanical properties, casting properties and economical. It applied to the die casting part which the mechanical strength requirement is not high. Such as toys, light parts, decorations and part of the electric parts.

No.5: Good fluidity and good mechanical properties, high wear resistance. It applied to the zinc die casting part which has requirements of mechanical strength. Such as auto parts, mechanical and electrical parts, machinery parts, electrical components.

Domestic main zamak chemical composition %

Domestic main Zinc alloy chemical composition

Die-casting zinc alloy mechanical properties

Die casting zinc alloy mechanical properties

The precision of the Zinc Alloy Die Casting: ±0.05mm;

Smoothness of surface of rough part: Ra1.6~Ra3.2;

Shrinkage rate of zinc die casting products: 0.3%;

Material wastage rate: 5%;

General zinc die-casting machining allowance: 0.3mm~0.5mm;

Surface preparation methods: Sand blasted, Shot blasting, Powder coating, Painting, Plating, Electrophoresis, Polishing

The zinc alloy die casting production and QC control

Zinc die casting equipment and QC control

Zinc Die Casting Parts

Zinc Die Casting Parts, Zinc Die Cast, Zinc Alloy Die Casting, Zinc Die Castings, Zamak Die Casting Part, Zamak Injection Part