Brass turning is to fix the blank, use a high-speed rotating cutter to cut the blank, cut out the required shape and features, CNC turning machine can process complex shapes and features. Brass turning is a turning cutter that is suitable for machining planes, grooves, various forming surfaces and special shapes of the mold. Brass is the most popular material requested by our customers. Service Brass Parts,Cnc Turning Service Machining,Brass Cnc Turning Service Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com
Wire stripper machine, copper wire stripper is designed to strip various wire: Copper wire, single core wire, multicore wire, aluminum wire, sheet cble wire, flat wire, etc. After processed by a Scrap Cable Stripping Machine, metal like copper, aluminum or steel can be recovered
This machine is applicable to various types of wire, monofilament and filoselle cable.
It is a new wire stripping machine that widely used in the dissembling industry.
This machine has the following specifications:
Low power requirement.
Small dimensions.
Easy to move, place and install.
Easy and rapid maintenance.
Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Model
918-WSKA
918-WSKOB
918-WSKB
918-WSKB-B-1
Voltage
220V/380V
220V/380V
220V/380V
380V
Motor
2.2KW
2.2KW
4KW
5.5KW
Dimension(mm)
600*580*840
700*610*840
800*580*1200
900*580*1200
Weight
80KG
110KG
200KG
250kg
Capacity(KG/8H)
100-300
600-1500
800-2000
1500-3500
Chopping Range of Diameter
1-35mm
1-42mm
2-98mm
10-165mm
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.
Â
     Scrap Cable Wire Stripper Copper Wire recycling machine
Wire stripper machine, copper wire stripper is designed to strip various wire: Copper wire, single core wire, multicore wire, aluminum wire, sheet cble wire, flat wire, etc. After processed by a Scrap Cable Stripping Machine, metal like copper, aluminum or steel can be recovered
This machine is applicable to various types of wire, monofilament and filoselle cable.
It is a new wire stripping machine that widely used in the dissembling industry.
This machine has the following specifications:
Low power requirement.
Small dimensions.
Easy to move, place and install.
Easy and rapid maintenance.
Functions and features:
1. Functions and features of the cable stripper machine: Light, low noise, peel and strip, especially for cutting flat wire with soft silk, plug wire and the wire with inner core 2, 3 or 4 roots of round cable which can be stripped easily.
2. Please be sure that the joint parts of the feeding material has been cut off when feeding to avoid damaging the blades of the cable stripper. Before using the cable stripper, please adjust the machine first and debugging, don't start the motor.
3. Please fix and tighten the parts of screw if the out material can be separated. Then start the motor and recognize every parts of the hole and feed it by the root.
4. Comparing with other machine, the cable stripper machine is relatively complex. But if adjusted appropriately, the effect and the benefit are considerable.
5. The blade of the stripper machine should be regulated and grinded as it is. If so the cable stripper can be operated easily.
If the copper wire and rubber or plastic cannot be separated completely, please pay attention as below:
1, Choose the right feeding hole, adjust the positioning fixture via the diameter of cable'
2, Adjust the gap between the drove-gears according to the diameter of cable.
Basically, the gap should be smaller than the diameter of cable.
3, Keep both sides of the long blades to be symmetrical, as well as the long blades and the position of fixture.
Model
918-WSKA
918-WSKOB
918-WSKB
918-WSKB-B-1
Voltage
220V/380V
220V/380V
220V/380V
380V
Motor
2.2KW
2.2KW
4KW
5.5KW
Dimension(mm)
600*580*840
700*610*840
800*580*1200
900*580*1200
Weight
80KG
110KG
200KG
250kg
Capacity(KG/8H)
100-300
600-1500
800-2000
1500-3500
Chopping Range of Diameter
1-35mm
1-42mm
2-98mm
10-165mm
Established in 2006, our company is one professional manufacturer integrating R&D,manufacturing and trading,we are committed to feed machine,pellet machine,hammer mill,grinder mill,briquette machine,snack food extruder machine,coal process machine line,straw briquette machine line,food machine line,farming,agriculture equipments for years.We have 80 staff members and 16 technicians of research team. So we have more competitive strength,advanced processing technology and scientific management.And we are located in Zhengzhou city,Henan province,which is the business and economy center with easy transportation.Our international airport name is Zhengzhou Xinzheng International Airport.
Â
Scrap Cable Wire Stripper Copper Wire Recycling Stripping Machine
Model NO.: CE, CO, BV
Trademark: GMEC
Specification: ISO, CO, CE, CCC
Origin: Zhengzhou
HS Code: 8479819000
Model NO.: CE, CO, BV
Trademark: GMEC
Specification: ISO, CO, CE, CCC
Origin: Zhengzhou
HS Code: 8479819000
     Scrap Cable Wire Stripper Copper Wire recycling machine