Face Mask Medical,Charcoal Face Mask,Charcoal Mask,Disposable Dust Mask Dongguan Meiao Medical Device Technology Co., Ltd , https://www.dgmeiao.com
2QB high pressure blower works: 2QB high pressure vortex blower (2QB high pressure ring blower, 2QB high pressure blower) impeller directly mounted on the motor rotor, is completely non-contact compression. Since the pump bearings are mounted outside the compression chamber, maximum operating reliability of the machine is ensured even when working under the maximum differential pressure. The gas is sucked in by the suction port 1. When it enters the side channel 2, the rotating impeller 3 gives the gas a speed in the direction of rotation, while the centrifugal force on the blade accelerates the gas outward and the pressure increases. As the rotation proceeds, the gas The kinetic energy increases so that the gas pressure along the side channel increases further. As the side channel narrows at the beginning of the exit, the gas is forced out of the vane and the row of pump bodies is silenced through the outlet.
2QB high pressure blower performance characteristics:
1. Ultra-quiet type, no noise: The motor runs directly, and the noise of the high-pressure fan is improved by adding an integrated sound-relief facility, thereby achieving a silent effect.
2. High reliability When the usage changes, the machine can still operate safely. In addition to the impeller, the high-pressure vacuum blower has no other moving parts, so the reliability is almost maintenance-free. The use of a unique, high-displacement precision outer bearing, therefore, it has the following advantages: high compression ratio; low bearing operating temperature; long grease life; maintenance-free.
3. The installation is easy to complete, ready to install and use, for compressed air or vacuum, can also be installed in any horizontal or vertical direction.
4. Oil-free and pollution-free rotation When the impeller rotates, it does not come into contact with any part of the part and is free from lubrication, so it can guarantee 100% pollution-free.
5. Highest quality After more than 30 years of professional manufacturing experience, the most sophisticated mechanical design coupled with prudent motors and standard instrument testing, using all parts can achieve the highest quality requirements, using standard ip54, class F motors with high efficiency, few failures, motor There is a shaft seal test with the blower to prevent foreign matter from entering. At the same time, in order to ensure functional effects, each 2QB high-pressure blower has undergone rigorous testing before leaving the factory.
6. Voltage: Universal voltage type, 50HZ60HZ are available, regardless of your product is exported to Europe and the United States to use 60Hz, high voltage countries, or the Middle East, Africa and other countries and regions using 50Hz voltage, 2QB high pressure fans can meet the requirements, Functional production is complete, so you no worries!
The scope of application of 2QB high pressure blower:
Environmental engineering industrial machinery, plastic machinery (dehumidification dryer), printing machinery (screen printing machine), photoengraving, pcb equipment, electrical equipment, medical equipment, all kinds of burning machine, environmental protection and so on.
Taiwan's industrial high-pressure fan principle and application
Taiwan's industrial high-pressure fan principle and application Regenerative fan designed according to the principle of regeneration. Blades that have turned through the tuyere suck in the wind and apply centrifugal force to accelerate the wind outwards. The regeneration principle means that the air is forced back to the bottom of the next blade by the annular casing and is thrown out again. Each regeneration increases some pressure. .