The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1

September 18, 2018

Model NO.: ISOEM A8-P2-O1-SD1
Package: DIP 24pin, UL94V-0
Wielding Temperature (<10s): +300degree
Operating Temperature: - 45degree~ + 85degree
Trademark: Sunyuan or OEM
Transport Package: Plastic Tube and Gift Box
Origin: Guangdong, China
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1

Features:
Zero, Gain, Full scale calibration are available through external multi-turn potentiometer.   
Power distribution in input end for function expansion: 5V,12V,15VDC 
Isolated amplification and conversion on analog signals: 0-75mV/0-10V/0-1mA/4-20mA 
 Precision grade:0.1, 0.2; nonlinearity grade (in full measuring range) <0.2%. 
Isolation power among auxiliary power, analog input, output: 3KVDC  
 Auxiliary power: 5V,12V,15V,24VDC,etc single power. 
 Electro-magnetic anti-interference circuits /shielding measures are required in the field with special EMC.  
Low cost, compact DIP 24Pin, UL94V-0 standard flame retardant package. 
 Industrial Temperature range: -20 ~ +70 ºC
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1
The Signal Fence for Power Control and Medical Equipment Isoem A8-P2-O1-SD1



Applications:
 Isolated power distribution for passive sensors and signals acquisition and transmission.  
 Distribute power for pre-amplification, electric bridge and other circuits to collect signals.  
 Isolated data acquisition of analog signals from PLC, DCS. 
 Analog signal GND wire anti-interference and data isolated acquisition.  
 DC current/voltage signal isolation, conversion and amplification.  
 Long distance isolated transmission of industrial site signals.
 Meters, instruments and sensors signal acquisition and transmission.  
 Power monitoring control, medical equipments isolated safety bar.

Category: 		Isolation Amplifier >> mV Small Signal Isolation Transmitter
Input  0-75mV/0-2.5V/0-5V/0-10V/0-±100mV/0-±5V/0-±10V/0-10mA/0-20mA/4-20mA/0-±10mA/0-±20mA,etc Output  0-75mV/0-2.5V/0-5V/0-10V/0-±100mV/0-±5V/0-±10V/0-10mA/0-20mA/4-20mA/0-±10mA/0-±20mA,etc
Isolation Method: Magneto-electric Isolation voltage 3000KVDC
package  DIP 24Pin    
Remark   0-10V/0-5V/4-20mA Isolated Converter with Distribution Power(Zero/Gain Adj.)

Since its establishment, Sunyuan Technology has been concentrating on the high-tech application research, the development and manufacture of Isolation DC-DC Converters, Signal Isolation Amplifier/Converter modules and Signal Data Acquisition Modules. The techniques applied are in accordance with the international standards and the products have acquired more than 10 certificates of Chinese patent and software copyright. All the products developed and designed by Sunyuan Technology operate well with the key electronic components used in new developing high-tech industry as rail transit, military equipments, national power grid, wind energy, solar power, electric vehicles in China and have high performance in the special operating conditions including industrial grade high/low temperature, shock, humidity and EMC interference,etc. The products are also widely applied to electric power system, telecom, instrumentations & measurements, medical equipments, industrial intelligent control, automotive electronics, security-monitoring system, military industry, etc.
Production Management:
In August, 2007, the company was certified by the ISO9001:2000.
In September, 2012, the company was certified by the ISO9001:2008.
Product Technology:
In September, 2007, the electronic products were approved as qualified products by Quality Supervision Bureau of Shenzhen City and confirmed that all the technical specifications are in accordance with the design and application criterion.
DC- DC Converter:
In February, 2004, the first batch of new products passed EMC test, the products were certified by the CE.
In January,2006, the second batch of new products passed EMC test, the products were certified by the CE.
In November,2005, all the products were certified by the RoHS.
Isolation Transmitter/Converter:
In January, 2006, the products passed EMC test and were certified by CE.
In November, 2005, the products were certified by the RoHS.
Data Acquisition Device:
In October, 2012, the products passed EMC test and were certified by CE.
In August, 2012, the products were certified by RoHS.

Contacter:  Queenie Peng
    
Tel: 0086-755-83100080-819    Mob:0086-13556800351 

 

Injection Molding Machine Around Equipments

For Injection Molding Machine around equipments, there are Injection Molding Mechanical Hands, Automatic Material Feeder,  Material Dryer ,  Mold Services and so on. In the production, these equipments are working together with injection molding machine, made the injection molding process more efficiency and convenient. Also, we are specialize in the R&D, manufacture and sales of above equipment machine and injection molding machine. If you are interested in our products, welcome feel free to contact us, we will offer excellent quality products and efficient after-sales service.

Injection Molding Machine Around Equipments

Injection Molding Mechanical Hands,Automatic Material Feeder,Material Dryer,Mold Services

DONGGUAN TIANCHENG MACHINERY CO., LTD. , http://www.tcinjectionmachine.com