The background and signification of research this program
As plastic has been used for all other industry widely, they are playing an important role in the development of our economy, but plastic did not easy to broken after being used and it becomes a big pollution for our environment .Therefore it is urgent to process those waste material without pollution.
In addition ,as the fastest development of world economy ,the shortage of petroleum will be urgent more and more .even the expert had stated that it will have no petroleum recover in earth after 15 years later, so searching the new resource becomes an issue which is concerned by all the countries of the world.
so it have great meaning of settle this program ,which can recycled waste material like plastic into resources without any pollution.
1.Working process Of waste plastic pyrolysis plant:
First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.
2. Model of waste plastic Pyrolysis plant:
Model
Reactor size
Material
Handling capacity
Weight
Seaworthy packing
LJ-8
2200*6000mm
Q245R boiler steel plate
5 tons
24tons
2*40HQ
LJ-9
2200*6600mm
Q245R boiler steel plate
8tons
26tons
2*40HQ
LJ-10
2600*6600mm
Q245R boiler steel plate
10tons
30tons
1*40FR+1*40HQ
3. Plastic Oil output reference: 20%~75%
5. Land requirement: 300sq meters(10m*30m)
6. Exporting Experience:
America:
Brazil, Canada, Colombia, USA,
Middle East:
Dubai, Iran, Jordan, Saudi Arabia, Turkey
Europe:
Albania , Bosnia and Herzegovina
Asia:
Afghanistan, India, Malaysia, Pakistan, Philippines, South Korea, Vietnam, Myanmar
Africa:
Ghana, Mozambique, Zambia
Waste Plastic Pyrolysis Plant,Full Automatic Waste Plastic Pyrolysis Plant,Oil Distillation Plant,Rubber Refining To Oil Plant Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com
Cleaner wash.
Second, after cleaning, high-temperature steam is also required for sterilization and disinfection. After cleaning, equipment should be properly placed.
Third, when the installation should pay attention to the direction of the import and export can not be reversed, it is necessary to pay attention to the bottom of the mouth is the entrance, the filter plug
The pipe on the mouth is the exit.
Fourth, put the filter when it is placed vertically, after inserting the plate with the tip of the fins, tighten the screw to keep it
can.
Fifth, when the equipment is used, the pressure is maintained at about 0.1 MPa, and the filter may go out with the increase of the use time and flow rate.
There is a slight blockage.
6. Even if the pressure on the equipment is increased, it must not exceed 0.4 MPa, otherwise the filter element will be damaged.
7. The pressure gauge in the primary air filter is used to indicate the pressure of the liquid. If it is a secondary filter, then
The pressure gauge of the filter will be slightly smaller.
Eighth, the longer the use of a primary filter, the longer the pressure will gradually increase and the flow rate will slow down. This time
It shows that the filter element in this device has been blocked and needs to be replaced in time.
4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste plastic pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets.
Tips for installing initial filters
First, the new pre-filter must be cleaned with a special detergent before use to avoid the use of acids