Exhaust gas treatment refers to the process of pre-processing the exhaust gas produced in industrial sites and factory workshops before they are discharged, so as to meet the national standards for external emission of exhaust gas. General waste gas treatment includes organic waste gas treatment, dust exhaust gas treatment, acid and alkali waste gas treatment, odor exhaust gas treatment and air sterilization and purification. Waste gas treatment has five major factors: First, it depends on whether it is an industrial site. Exhaust gas treatment should distinguish air purification in civil places. The industrial waste gas treatment should be able to effectively remove the waste gas such as benzene, toluene, xylene, ethyl acetate, acetone butanone, ethanol, acrylic acid, formaldehyde and other organic waste gases, hydrogen sulfide, sulfur dioxide, and ammonia generated in the factory floor. Industrial waste gas treatment is widely used in chemical plants, electronics factories, printing plants, paint workshops, coating plants, food factories, rubber plants, paint factories, petrochemical industries, and other places produce dust, odor, smoke and dust and other places. Waste gas treatment equipment working principle: The acid-alkaline, organic waste gas purification tower is a two-phase reverse flow packed absorber. The exhaust gas body enters the exhaust gas purification tower in a tangential direction from the air inlet below the exhaust gas treatment tower, and then evenly rises to the first-stage filler absorption section through the uniform flow section. On the surface of the exhaust gas treatment filler, acidic (or alkaline) substances in the gas phase chemically react with alkaline (or acidic) substances in the liquid phase, and Agile products, and then the exhaust gas body rises to the secondary filling section and the spray section. With reaction. The treated clean air is discharged into the atmosphere from the exhaust pipe at the upper end of the exhaust gas purification tower. Waste gas treatment tower performance characteristics: Exhaust gas treatment equipment has a wide range of applications: chemical plant exhaust gas treatment, light industry, printing and dyeing, pharmaceutical waste gas treatment, pharmaceutical factory waste gas treatment, pharmaceutical waste gas treatment, iron and steel, machinery, printing waste gas treatment, spray paint exhaust gas treatment, electronics factory waste gas treatment, instrumentation, Electroplating plant exhaust gas treatment and other organic waste generated during the production process of the industrial sector such as benzene exhaust gas treatment, toluene exhaust gas treatment, xylene exhaust gas treatment, ethyl acetate exhaust gas treatment, acetone butanone exhaust gas treatment and other organic waste gas treatment; sulfuric acid, nitric acid, hydrochloric acid, Exhaust gases such as hydrofluoric acid and sulfur oxides nitrogen oxides, carbon oxides, cyanide and other acid-alkaline gases, using the company's industrial waste gas purification equipment, can be satisfied with the exhaust gas treatment effect. Exhaust gas treatment equipment has high purification efficiency: The purification efficiency of various concentrations of acidic (or alkaline) and organic exhaust gas can reach 85%~98%. Exhaust gas treatment equipment has low resistance: it is the lowest resistance among all kinds of filler absorption towers. The exhaust gas treatment equipment has a small footprint: it is convenient for on-site installation and operation management, and has a small footprint, which can be adapted to both new construction and technical upgrading projects. Waste gas treatment equipment use matters needing attention Before using the exhaust gas treatment equipment, check whether the pipeline valves of the various systems of the equipment are in good condition, and whether the absorption liquid medicament is selected and the ratio is correct. The air-purifying fan and water pump connections cannot be easily tampered with, and they must be absolutely sure that their steering is correct. After the exhaust gas purification treatment equipment is delivered and delivered, the use unit shall send someone to use it for custody and periodic inspection. Exhaust gas purification equipment installed outdoors, water pump fan motor should be made rain cover, in order to avoid motor damp. Exhaust gas cleaning liquid replacement and matching: The formulation ratio of the purified absorption liquid is determined according to the user's unit gas source and the concentration level.
Grain Milling Equipment
Second step in the Flour Milling Plant,also the key part in Flour Mill , the basic working is grinding the grain by the Roller Mill and classify
the flour by the sifter,purification the flour grade by the purifier,
and get more flour extraction rate by the bran brusher,also adopt the
impulse dust filter to reduce the dust while working. the main products includes:
5.Impulse dust collector
*Related Products: Wheat Flour Mill ,Flour Milling Machine.
Milling Equipment Flour Milling Machine, Roller Mill, Double Bin Sifter, Square Plansifter, Wheat Flour Purifier, Corn Flour Milling Machine Shijiazhuang Goldrain I/E Co.,Ltd. , https://www.goldraingroup.com
2.Sifter ( Double Bin Sifter,plan square sifter)
3.Purifier
4.Bran brusher