X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection Security Equipment

February 10, 2021

Model NO.: AT2800
Alarm Form: Audible Alarm
Energy Level of X Ray Source: 320kv
Speed: 10m
Scanned Vehicle Size: Height 3000mm, Width 3000mm
Trademark: safeway system
Transport Package: Carton
Specification: CE, FCC, ISO, ROHS, FDA
Origin: China
HS Code: 9022191000
Model NO.: AT2800
Alarm Form: Audible Alarm
Energy Level of X Ray Source: 320kv
Speed: 10m
Scanned Vehicle Size: Height 3000mm, Width 3000mm
Trademark: safeway system
Transport Package: Carton
Specification: CE, FCC, ISO, ROHS, FDA
Origin: China
HS Code: 9022191000
OEM X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection - Direct Factory
Designed and patent owned by Safeway System

AT2800 is designed as a passenger vehicles and small cargo (including minibuses) screening system, with higher penetration ability than AT2900. The X-Ray is from top to bottom, which give a better perspective than side scan for detection of contraband, illegal drugs, weapon and other dangerous objects. It's equipped with a gantry rail which can move forward the cars and vehicles automatically,  leaving the drivers and passengers outside the cars, zero radiation. The product is part of the cargo and vehicle inspection system family of products that complies with the ANSI 43.17 regulations for general use.

Intense of use


1. State-of-the-art low-dose 320 kV X-ray scanner with 3 m x 3 m portal-shaped detection system for inspection of occupied passenger vehicle

2. Designed for inspection of cars for detec  on of contraband, illegal drugs, weapon and other dangerous objects;

3. Designed for operation at traffic control points and other places where total 100% cars inspection is necessary.

4. Designed with gantry rail which can move through the cars and vehicles automatically




KEY FEATURES

Gantry rail design moving the cars automatically
t's equipped with a gantry rail which can move forward the cars and vehicles automatically, leaving the drivers and passengers outside the cars, zero radiation

High penetration
The AT2800 is with 300kv generator producing X-Ray from top to bottom, offering high-quality X-ray images of inspected objects through 60 mm of steel at car speeds of 10 km/h.

High quality X-ray images
To ensure proper detectability of the concealed objects, the AT2800 produces images with the 2% of the contrast sensitivity and 0.8mm copper wire detection capability.

Dual energy imaging
The AT2800 has an automatic color coding for materials separation (3 colors) feature allowing distinguishing between organic, non- organic and metal materials. This feature helps the operator to detect dangerous object from the various materials.

Radiation safety
The AT2800 ensures the low dose for driver and passenger operation (complies with ANSI 43.17 standard) as well as protection of the operator. The inspection portal is equipped with the video surveillance system to avoid the inspection of the passer-by's.

Automatic recognition of the licence plate number (option)
With the additional camera (option) the AT2800 is able to identify and store the licence plate number of each scanned vehicle.

Under video vehicle surveillance (option)
Upon request, the AT2800 can be provided with the video surveillance system for under-vehicle inspection

 
Physical Specifications
Equipment size 16.5(L) * 6.5(W) * 5.5(H) M
Installation area ideally 16.5(L)* 6.5(W) * 6.5(H)M
General Specifications  
Tunnel size 3(L) * 3(H)m
Scanning Speed 5-10km/h
Typical throughput 150pcs vehicles/hour
Max Vehicle length 20m and extendable
Penetration Typical  65mm  steel, application  40mm  steel
Wire Resolution Dia 1.0mm copper wire
Mix Dose to passengers <0.2μsv/scan
Dose rate outside Public area<0.5μsv compliant with IAEA standard
Power Consumption Max. 3KVA
Operator 's workstation PC-based workstation with the 24" LCD diaplay
X-ray Generator(single)  
Dual energy accelerator 300kv
X-Ray direction From top to bottom
Operating Environment  
Operation temperature/Humidity -15ºC-55ºC/5ºC-95ºC(non-condensing)
Storage temperature/Humidity -40ºC-70ºC/5ºC-95ºC(non-condensing)
Operation Power 220VAC(±10% ) 50±3Hz (Optional:100VAC,110VAC,120VAC,200VAC)
X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection Security Equipment
X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection Security Equipment

  OEM X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection - Direct Factory
Designed and patent owned by Safeway System

AT2800 is designed as a passenger vehicles and small cargo (including minibuses) screening system, with higher penetration ability than AT2900. The X-Ray is from top to bottom, which give a better perspective than side scan for detection of contraband, illegal drugs, weapon and other dangerous objects. It's equipped with a gantry rail which can move forward the cars and vehicles automatically,  leaving the drivers and passengers outside the cars, zero radiation. The product is part of the cargo and vehicle inspection system family of products that complies with the ANSI 43.17 regulations for general use.

Intense of use


1. State-of-the-art low-dose 320 kV X-ray scanner with 3 m x 3 m portal-shaped detection system for inspection of occupied passenger vehicle

2. Designed for inspection of cars for detec  on of contraband, illegal drugs, weapon and other dangerous objects;

3. Designed for operation at traffic control points and other places where total 100% cars inspection is necessary.

4. Designed with gantry rail which can move through the cars and vehicles automatically




KEY FEATURES

Gantry rail design moving the cars automatically
t's equipped with a gantry rail which can move forward the cars and vehicles automatically, leaving the drivers and passengers outside the cars, zero radiation

High penetration
The AT2800 is with 300kv generator producing X-Ray from top to bottom, offering high-quality X-ray images of inspected objects through 60 mm of steel at car speeds of 10 km/h.

High quality X-ray images
To ensure proper detectability of the concealed objects, the AT2800 produces images with the 2% of the contrast sensitivity and 0.8mm copper wire detection capability.

Dual energy imaging
The AT2800 has an automatic color coding for materials separation (3 colors) feature allowing distinguishing between organic, non- organic and metal materials. This feature helps the operator to detect dangerous object from the various materials.

Radiation safety
The AT2800 ensures the low dose for driver and passenger operation (complies with ANSI 43.17 standard) as well as protection of the operator. The inspection portal is equipped with the video surveillance system to avoid the inspection of the passer-by's.

Automatic recognition of the licence plate number (option)
With the additional camera (option) the AT2800 is able to identify and store the licence plate number of each scanned vehicle.

Under video vehicle surveillance (option)
Upon request, the AT2800 can be provided with the video surveillance system for under-vehicle inspection

 
Physical Specifications
Equipment size 16.5(L) * 6.5(W) * 5.5(H) M
Installation area ideally 16.5(L)* 6.5(W) * 6.5(H)M
General Specifications  
Tunnel size 3(L) * 3(H)m
Scanning Speed 5-10km/h
Typical throughput 150pcs vehicles/hour
Max Vehicle length 20m and extendable
Penetration Typical  65mm  steel, application  40mm  steel
Wire Resolution Dia 1.0mm copper wire
Mix Dose to passengers <0.2μsv/scan
Dose rate outside Public area<0.5μsv compliant with IAEA standard
Power Consumption Max. 3KVA
Operator 's workstation PC-based workstation with the 24" LCD diaplay
X-ray Generator(single)  
Dual energy accelerator 300kv
X-Ray direction From top to bottom
Operating Environment  
Operation temperature/Humidity -15ºC-55ºC/5ºC-95ºC(non-condensing)
Storage temperature/Humidity -40ºC-70ºC/5ºC-95ºC(non-condensing)
Operation Power 220VAC(±10% ) 50±3Hz (Optional:100VAC,110VAC,120VAC,200VAC)
X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection Security Equipment
X-ray Car and Vehicle Scanner for Cargo and Vehicle Security Inspection Security Equipment

 


We are Guang Zhou Fat Chassis Technology Co. Ltd. , specialized in professional air suspension and chassis auto part.

Our main bussiness is about producing and exporting auto parts of air shock absorber,air spring,Air Compressor and air suspension repair kits and so on.

We hold the management concept of "quality first,service upmost" and the policy of "integrity based,good service and resonable prices",and enjoy a high reputation among customers.

We have our own factury in The 18th, Industry Zone, Baiyun District,Guangzhou,China.Welcome to visit!


RQQ500020


1. What's your payment? T/T, PayPal, Western Union, Escrow
2. What's your MOQ? MOQ: 1PCS Per Model

3.What's the delivery time?

2-5 Days, it is up to your quantity and our stock.If in stocks,once you send the payment,products will be sent out within 3 days. 
4.What are your main products?

Our main products include Air Suspension Shock,air spring, air suspension repair kits,aircompressor,rubber sleeve,dust cover, power steering,etc

5.Can you send me your catalogue? Yes. Pls contact us; we can share with you our catalog by dropbox. 
6.What is your price and discount? The above price is our wholesale price.If you'd like to know more our discount policy,pls feel free to contact us.
7.What is your pilicy of warranty We provide 3 year's warranty for the crimping machines, 1 year's warranty for the new suspension parts and 6 months' warranty  for the rebuilt products.
8.What is your packing way? Neutral packing and accept customer's special packaging demand.We can make an invoice as you want to help you save money.

Air Compressor Dryer

Air Compressor Dryer,Air Compressor Include Dryer,Compressor Refrigerated Air Dryer,Refrigerated Air Compressor Dryer

Hangzhou Hanray Industry Co., Ltd , https://www.aircompressor.pl