Jewelry Box We are OEM factory,We could make different size of Color Packaging Box ,we have paper printing machine and we got plastic printing partner,we can make mouldbase on your request too.So,we can make the Color Box With PVC Window base on your design.we aer the China Hang Tag ,Printing Label,Cardboard Boxes,Paper Bags Manufacturer and Supplier.and now,we can offer tin box too.Including tin packaing box, Gift Tin Box ,pacaking tin box,Food Tin Box, Tea Tin Box ,we have about hundrens set of existing mould and we can make a new mould base on your idea, I hope we can have cooperation soon. Hang Tag,Printing Label,Cardboard Boxes,Paper Bags Manufacturer and Supplier. Xing Hua Printing Factory , https://www.xinghuaprint.com
Driving trolley line configuration introduction
Driving trolley line configuration introduction:
Unipolar safety wire contact accessories configuration list:
Relevant fittings for use in unipolar trolley wires; collectors, shoe pieces (contact shoes, carbon brushes, blades), access sections, power input parts, joint jackets, aluminium fittings, end shields, single hole holders / Four-hole clamp, four-hole lifting pylon, single-hole lifting pylon, current collector bracket, temperature compensator (expansion section), among them, collector, maintenance section, and temperature compensator (expansion section) that require extra charge .
(1) How many meters are required for the trolley line?
Sliding line length = workshop length x three-wire/four-wire (If using a three-phase three-wire slide wire, multiply it by three. If using a three-phase four-wire slide wire, multiply by four).
(2) Number of trolley wires = Number of trolley wires ÷ 4.5/6 (Lightweight trolley wire is 4.5m, and heavy trolley wire is 6 meters long)
(3) Number of collectors = number of trips x three-wire / four-wire (If using a three-phase three-wire sled, multiply it by three, if using a three-phase four-wire sled, multiply by four).
(4) Current collector bracket = number of vehicles = number of current collectors
(5) Aluminium connector = trolley wire length ÷ 4.5/6
(6) Number of connector sheaths = number of aluminum connectors
(7) Light steel contact angle steel bracket = four-hole lifting rack = workshop length ÷ 1.2/1.5 (The angle of light bracket is generally 1.2m or 1.5m, and the heavy one is 3m. )
(8) Power Input = Line x Power Supply x Span
(9) Four hole clamps; one span 2 pieces
(10) Heavy-duty trolley wire angle bracket = workshop length ÷ 2.4/3 (2.4m or 3m angle bracket for heavy-duty trolley wire)
(11) single hole lifting bracket = angle bracket x-ray system (wire system is the three-phase three-phase three-wire, three-phase four-wire four-line)
(12) single hole clamp = wire x2x span
(13) End sheath = wire x2x span