Metal stamping is a manufacturing process used to convert flat metal sheets into specific shapes. It is a complex process that can include a number of metal forming techniques - blanking, punching, bending and piercing, to name a few.
Metal stamping is commonly used for a variety of applications. It is a versatile process capable of producing large volumes. Custom metal stamping dies are diverse and can be configured to create parts for multiple applications, including:
Due to the repeatability, durability, and precision of metal stamped components, metal stamping is also ideal for the automotive and medical industries where performance is crucial.
metal stamping,sheet metal stamping dies,progressive die,transfer die Wuxi IDO Technology CO.,LTD , https://www.idotechina.com
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells
Item
GL -Â II Truck Mounted Drill
Hole Diameter (mm):
90 - 1200
Hole Depth (m):
150
Run of Rod (m):
3
Drill Rod Diameter (mm):
60 \ 73 \ 89 \ 95 \ 133
Drill Head Inside Diameter (mm):
35 \ 60 \ 81 \ 120
Rig Mass (kg):
9100
Drilling Technology :
Normaland Reverse Circulation for Both Mud and Air
Down-The-Hole Hammers:
Middle-High-Pressure Air
Drill Head Lifting Speed (m/s):
0.25 0.15
Drill Head Lifting Force(kN):
94.55
Feed Thrust (kN):
0 - 12
Drill Head Spin Speed (r/min) :
A(Forward:13-22-48, Reverse:10-17-36)
B(Forward: 48-84-184, Reverse: 37-65-142)
Main Hoist Lifting Force (kN):
18.54
Mud Pump:
BW450
Flow (L/min):
450 350
Pressure: (Mpa)
1.2 2.0
Power Unit:
Diesel Engine
Power(Kw):
42
Supporting Form
Hydraulic Unit
Mask Up-Down:
Hydraulic Unit
Chassis:
DONG FENG EQ1093(four-wheel drive)
Dimensions(mm): (L-W-H)
Working Conditions: 7900*2370*7200
Transport status: 8450*2370*3400
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
Â
Â
Â
Products>>Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Drilling equipments and Drilling tools
Drilling Rig
DTH drilling rig, Blasthole drill rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig, Anchor drilling rig, Rotary drilling rig, Auger drilling rig, CBM drilling rig etc.
Drillling Auxiliaries
DTH hammers, DTH bits, Downhole Motor, Pumps, Tricone bits, PDC Bits, Button Bits, Chisel Bits, Cross Bits, Drill pipe, Drill collars, Cutter Picks, etc.
Â
  Â
Due to the continuous effort and improvement, Glorytek's market share keeps increasing rapidly, meanwhile, the perfect after-sales service is providing a strong support and guarantee for the expanding of business cooperation. Till now, we enjoy the good reputation and our products have been winning the confidence of a lot of domestic and overseas customers like Canada, Australia, Nigeria, Pakistan, Russia, Ethiopia, Indonesia, Malaysia, etc. more than 30 countries.
Â
Main Application
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells
Item
GL -Â II Truck Mounted Drill
Hole Diameter (mm):
90 - 1200
Hole Depth (m):
150
Run of Rod (m):
3
Drill Rod Diameter (mm):
60 \ 73 \ 89 \ 95 \ 133
Drill Head Inside Diameter (mm):
35 \ 60 \ 81 \ 120
Rig Mass (kg):
9100
Drilling Technology :
Normaland Reverse Circulation for Both Mud and Air
Down-The-Hole Hammers:
Middle-High-Pressure Air
Drill Head Lifting Speed (m/s):
0.25 0.15
Drill Head Lifting Force(kN):
94.55
Feed Thrust (kN):
0 - 12
Drill Head Spin Speed (r/min) :
A(Forward:13-22-48, Reverse:10-17-36)
B(Forward: 48-84-184, Reverse: 37-65-142)
Main Hoist Lifting Force (kN):
18.54
Mud Pump:
BW450
Flow (L/min):
450 350
Pressure: (Mpa)
1.2 2.0
Power Unit:
Diesel Engine
Power(Kw):
42
Supporting Form
Hydraulic Unit
Mask Up-Down:
Hydraulic Unit
Chassis:
DONG FENG EQ1093(four-wheel drive)
Dimensions(mm): (L-W-H)
Working Conditions: 7900*2370*7200
Transport status: 8450*2370*3400
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
Â
Â
Â
Products>>Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Drilling equipments and Drilling tools
Drilling Rig
DTH drilling rig, Blasthole drill rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig, Anchor drilling rig, Rotary drilling rig, Auger drilling rig, CBM drilling rig etc.
Drillling Auxiliaries
DTH hammers, DTH bits, Downhole Motor, Pumps, Tricone bits, PDC Bits, Button Bits, Chisel Bits, Cross Bits, Drill pipe, Drill collars, Cutter Picks, etc.
Â
  Â
Due to the continuous effort and improvement, Glorytek's market share keeps increasing rapidly, meanwhile, the perfect after-sales service is providing a strong support and guarantee for the expanding of business cooperation. Till now, we enjoy the good reputation and our products have been winning the confidence of a lot of domestic and overseas customers like Canada, Australia, Nigeria, Pakistan, Russia, Ethiopia, Indonesia, Malaysia, etc. more than 30 countries.
Â
Gl-II Truck Mounted Drilling Rig "Well Drilling Rig"
Model NO.: GL-II
Down-The-Hole Hammers: Middle-High-Pressure Air
Drill Head Lifting Force(Kn): 94.55
Feed Thrust (Kn): 0-12
Main Hoist Lifting Force (Kn): 18.54
Trademark: GLORYTEK
Transport Package: Standard Export Packing
Specification: SGS
Origin: China
Model NO.: GL-II
Down-The-Hole Hammers: Middle-High-Pressure Air
Drill Head Lifting Force(Kn): 94.55
Feed Thrust (Kn): 0-12
Main Hoist Lifting Force (Kn): 18.54
Trademark: GLORYTEK
Transport Package: Standard Export Packing
Specification: SGS
Origin: China
Main Application