According to regulations, live birds reception should be at the wind down area of the processing plant. Including parking area, slaughtering-waiting area, unloading ,live birds hanging, stunning and bleeding area, crates cleaning, crate pelleting,vehicle disinfection area,waste store ,reception and urgent killing area and so on. The slaughterhouse is appropriate to single layer, net height is not less than 4.2 meter, the polar space not less than 6 meter, hanging area is the main workshop bleeding room design to be darkroom which separate with our working area.Close to one side to receiving area is to be working area, including clearing room, official quarantine room, if have halal products, should with one rest room for Iman.
1.Live poultry vehicles should have special road. There is a disinfection pool which same wide as door at the entrance for live poultry enter..The pool size is about 3 meters long and 100 to 150mm deep.
3. Live birding hangingThere should be a darkroom after birds hanging and stunning, the orbit of overhead conveyor line should be kept level,straight ,try to reduce the turns and movements; The overhead conveyor line with synchronous control system and emergency stop system to ensure the reliable running of the processing line. The appropriate shackles are used according to different type of poultry and raising period; Try to keep poultry appease to prevent wings injury from struggling to ensure meat quality.
Live Bird Receiving Unit, Chicken Hanging Unit, Live Bird Reception, Chicken Reception Connect Group For Poultry Project , http://www.connectpoultry.comProduct Application
    Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.
 Operating Principle:
It is equipped with three layer filter system
1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.Â
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.
The basic Stage Filtration Process about the welding fume extractor
Stage 1: Air passes trhough  the pre-filter fire-proof net.Â
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter.Â
Stage 3: Air passes through the LongLife-H filter where welding fume particles are captured and deposited.Â
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment.Â
Facility Characteristics
1)       It is equipped overload prevention circle to avoid motor damage. It is of steady performance.Â
2)Â Â Â The operation panel is clear and simple, very easy to operate.Â
3)Â Â Â Â Â Â Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.
4) The filter core is imported from America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.
 5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers' health in the largest extent.Â
6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, safer and more reliable.Â
7) Clean air uniform guidance and dispersed from the grille outlet, to keep the noise minimum.
8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.
9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer's choice.Â
10) The parts working condition are all stable and have long useful life, meantime easy to be replaced.Â
Certifications
Detailed
Name:Filter cartridge
Brand:Â HUAXIN
Original:Â China
High filter cartridge imported from USA as the filtering element,PTFE membrane filter,for the adhesion of dust,PTFE caated filter element can filter dust particles reach 0.3um(optional higher level of filtration),the filtration efficiency reached 99.99%.Even if the ambient temperature is lower than the dew point temperature.The filter element also maintains a stable filtration capacity.PTFE membrane filter has the advantages of membrane filtration and rigid body filtration,and small volume,large filtration area of rigid filter allows high working pressure,and has a very long service life.
Name:Â Air collecting coverÂ
Brand:Â HUAXIN
Original:Â China
The unique design of the cover and Fireproof vacuum pipeline can be used to collect smoke and dust in large area. Laser cutting the material, the surface leveling size is accurate. The surface is sprayed on galvanized steel sheet with excellent rust preventive effect.
Name:Â High-quality part
Brand:Â HUAXIN
Original:Â China
Each part is strictly tested, every detail is well done, and the overall quality of the product is improved
Name: Brand fan and silencer cottonÂ
Brand:Â YINNIU
Original:Â ChinaÂ
Brand fan + silencer cotton can minimize noise, reduce occupational injuries and protect your health.
 factory profile
    Jinan Huaxin Automation Engineering Co., Ltd. is a national high-tech enterprise dedicated to providing centralized gas supply system, two or more gas mixing systems and industrial waste gas centralized treatment and purification solutions for modern factories.
    The company has registered capital of 30 million RMB, and has a strong R & D team., has obtained 13 national invention patents, utility model patents more than 40. In 2012, Huaxin Corporation officially established Jinan Huaxin Technology Research and Development Center; in 2013, was awarded Jinan "contract-abiding and credit-worthy enterprises", the same year was awarded "Jinan academician expert Grass-roots Service workstation"; in July 2014 was awarded a certificate of innovation fund for science and technology-based SMEs; in 2016, was awarded a demonstration of intellectual property rights in Shandong Province. Enterprises, in 2017, won the "national intellectual property advantage enterprises".
    As a leading manufacturer of Welding Fume Extractor and Gas Mixture Proportion Cabinet, We are pleased to inform you that we have cooperation with many big companies in the world. 
Packing & Delivery
Packaging
Size
80 (L) *135 (W) * 137 (D)
Weight
200KG
Packaging DetailsFumigated wooden box.
contact us
Product Application
    Use for purification of the smoke and dust during the welding, polishing, cutting, grinding process and the recycling of rare metals and precious material, can purify large amounts of suspended small metallic particles in the air.
 Operating Principle:
It is equipped with three layer filter system
1, under the help of the fan device, the welding fume is sucked into inlet through sucking hood. There is the flame arrester in the inlet, so the spark can be blocked here, the left fume and dust is sucked into gravity separator, and then the bigger particles firstly descend into dust bag.Â
2, the smaller particles are arrested in the surface of core filter. The cleaner gas then flow into clean room after being purified by core filters.
3, in clean room, the clean gas is then further purified by active carbon. At last, the gas meets the required standards and enters into air or other required room.
The basic Stage Filtration Process about the welding fume extractor
Stage 1: Air passes trhough  the pre-filter fire-proof net.Â
Stage 2: Air passes through a second pre-separator to further reduce medium to heavy particulate matter.Â
Stage 3: Air passes through the LongLife-H filter where welding fume particles are captured and deposited.Â
Stage 4: Activated carbon filter will help prevent or neutralize the release of odors back into the environment.Â
Facility Characteristics
1)       It is equipped overload prevention circle to avoid motor damage. It is of steady performance.Â
2)Â Â Â The operation panel is clear and simple, very easy to operate.Â
3)Â Â Â Â Â Â Pulsing back-flushing automatic dust-removal system: The filter core is the automatic rotating and back-flushing type, which keeps the filter core surface clean when working, to insure the stable blowing rate; the air compressor parts are connected with high pressure rubber pipe with high pressure air-inflow in the bottom, which insure the facility always in good working condition.
4) The filter core is imported from America with long useful life. It can arrest the 0.3μm particles. The filtering effect is good for all kinds of particles including the wet particles.
 5) It is equipped with the all-directions sucking arm of 360 degree rotating. It can suck the fume exactly from the source which make best of the fume collection efficiency, and insure the workers' health in the largest extent.Â
6) It is equipped with three layer filter system to avoid the damage effect of flame and large slag particles, which extend the useful life, safer and more reliable.Â
7) Clean air uniform guidance and dispersed from the grille outlet, to keep the noise minimum.
8) It is attached with all-direction caster wheels, which makes the facility movable freely and easy to position.
9) Photoelectric controlled on/off, energy saving and high efficiency. The hood has the lighting device which is upon customer's choice.Â
10) The parts working condition are all stable and have long useful life, meantime easy to be replaced.Â
Certifications
Detailed
Name:Filter cartridge
Brand:Â HUAXIN
Original:Â China
High filter cartridge imported from USA as the filtering element,PTFE membrane filter,for the adhesion of dust,PTFE caated filter element can filter dust particles reach 0.3um(optional higher level of filtration),the filtration efficiency reached 99.99%.Even if the ambient temperature is lower than the dew point temperature.The filter element also maintains a stable filtration capacity.PTFE membrane filter has the advantages of membrane filtration and rigid body filtration,and small volume,large filtration area of rigid filter allows high working pressure,and has a very long service life.
Name:Â Air collecting coverÂ
Brand:Â HUAXIN
Original:Â China
The unique design of the cover and Fireproof vacuum pipeline can be used to collect smoke and dust in large area. Laser cutting the material, the surface leveling size is accurate. The surface is sprayed on galvanized steel sheet with excellent rust preventive effect.
Name:Â High-quality part
Brand:Â HUAXIN
Original:Â China
Each part is strictly tested, every detail is well done, and the overall quality of the product is improved
Name: Brand fan and silencer cottonÂ
Brand:Â YINNIU
Original:Â ChinaÂ
Brand fan + silencer cotton can minimize noise, reduce occupational injuries and protect your health.
 factory profile
    Jinan Huaxin Automation Engineering Co., Ltd. is a national high-tech enterprise dedicated to providing centralized gas supply system, two or more gas mixing systems and industrial waste gas centralized treatment and purification solutions for modern factories.
    The company has registered capital of 30 million RMB, and has a strong R & D team., has obtained 13 national invention patents, utility model patents more than 40. In 2012, Huaxin Corporation officially established Jinan Huaxin Technology Research and Development Center; in 2013, was awarded Jinan "contract-abiding and credit-worthy enterprises", the same year was awarded "Jinan academician expert Grass-roots Service workstation"; in July 2014 was awarded a certificate of innovation fund for science and technology-based SMEs; in 2016, was awarded a demonstration of intellectual property rights in Shandong Province. Enterprises, in 2017, won the "national intellectual property advantage enterprises".
    As a leading manufacturer of Welding Fume Extractor and Gas Mixture Proportion Cabinet, We are pleased to inform you that we have cooperation with many big companies in the world.Â
Packing & Delivery
Packaging
Size
80 (L) *135 (W) * 137 (D)
Weight
200KG
Packaging DetailsFumigated wooden box.
contact us
2. UnloadingThe platform built which height is same as vehicles which save much labor. Two workers unloading crates from vehicle,each time unload 8 to 9 layer of crate, each hour unloading 12000birds. Normally unloading platform should be keep some crates. According to WSPA regulations, when live birds reach slaughterhouse should be killed within 1hour,max. Not more than 2 hours, for one slaughterhouse which to slaughter 12000birds/H, the parking place should be suitable for 5 trucks, unloading area is suitable for 2 trucks, crates pelleting area is suitable for 3 trucks, and with spare crates storage room to keep spare crates.
Large Arm Welding Fume Extractor Welding TIG/MIG Fume Extractor Laser Cleaner with Ce ISO9001 SGS
Model NO.: HXYD-ZD30
Filtration Accuracy: 99.9%
Mini Particle Size: 0.3um
Trademark: HX or OEM
Transport Package: Standard Export Packing or Customized
Specification: 650*670*1260
Origin: China
HS Code: 8421392990
Model NO.: HXYD-ZD30
Filtration Accuracy: 99.9%
Mini Particle Size: 0.3um
Trademark: HX or OEM
Transport Package: Standard Export Packing or Customized
Specification: 650*670*1260
Origin: China
HS Code: 8421392990