MID Certificated Multi Jet Dry Type Plastic Water Meter

January 28, 2021

Model NO.: MD-AP
Principle: Speed of Water Meter
Medium Pressure: General Water Meter
Work Environment: Dry Water Meter
Trademark: Aimei
Transport Package: Export Standard
Specification: Export Standard
Origin: China
HS Code: 9028201000

Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residential application in sizes 15mm-50mm for cold meter.
FEATURES:
Dry Type, Magnetic Drive, Pointer-roller indicator
Easy and long term clear reading ,frost resistance, long  working life ,etc.
Available with Anti-magnet and remote  output system  by pulse on request.
Plastic meters' body and impact plastic ring.
External regulating device, non return valve.
Standards Compliance 
Directive 2004/22/EC on measuring instruments; the European  Standard EN14154+A1+A2: Water Meter; the International Organization of Legal Metrology OIML R-49: 2006(E)
Optional Features 
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºCforcoldwater meter  
Water pressure:  ≤1MPa or 1.6MPa optional
                    10bar or 16bar optional)                                  
Installation requirements
The meter should be installed in horizontal position with the direction of the flow as 
indicated by the arrow plastic in the meter body with the register face upwards. 
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
MAXIMUM PERMISSIBLE ERROR
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%
ACCESSORIES
Each water meter has one set couplings optional: 2pcs tube,2pcs nut and 2pcs gasket

MID Certificated Multi Jet Dry Type Plastic Water Meter
MID Certificated Multi Jet Dry Type Plastic Water Meter

 
Type Size
(mm)		 Class qs
Max.Flow		 qp
Nominal Flow		 qt Transitional Flow qmin Min. Flow Min.Reading Max.Reading
m 3 /h L/h m 3
LXSG-15S 15 A 3 1.5 150 60 0.0001 99999
B 120 30
C 22.5 15
LXSG-20S 20 A 5 2.5 250 100 0.0001 99999
B 200 50
C 37.5 25
LXSG-25S 25 A 7 3.5 350 140 0.001 99999
B 280 70
LXSG-40S 40 A 20 10 1000 400 0.001 99999
B 800 200

LED Heat Sink FEATURES:

The aluminum material is melted in high temperature and become liquid status, then we pour it into the mould,. After cooling down, the product could be finished easily. We will take good care during the cooling process to avoid the bubble occurs. There's wide range of shape for Heat Sink in die-casting process.

In addition, if the quantity is huge enough, the cost would me much cheaper.
Many complicated metal components are produced by this process.

● High structural integrity

● Smooth die casting parts surface

● Reduce or eliminate secondary machining operation

● Rapid production rate

LED Heat Sink

LED Heat Sink,Heat Sink,Die Casting Heat Sink,Aluminum Die Casting Heat Sink

Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com