Match Automatic Annealing Robot, automatic cooling hardware products after annealing.
Applicable to stainless steel products including pan, bowl, dish, cover, basin, cup and more.
Available material shapes: square, rectangle, round
It connected with annealing machine and Annealing Robot, fully automatic pass the ware onto the conveyor and water cooling container, quickly cool down.
No manual operation, safe, good production quality and effectiveness.
Hardware Production Line,Automatic Annealing Line,Automatic Cooling Line Shantou Jiesheng Robot Technology Co. Ltd. , http://www.stjsrobot.com
1.Product Advantages:
Compact: The high-tech product, which is combined of laser device, computer, auto controller and precision machinery. It is small design and the complete weight is 22kg.
High Precision: Re-position precision is 0.002mm
High Speed: Imported scanning system makes the scanning speed is up to 7000mm/s
Easily Operating: Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW or Photoshop.
High Reliability: MTBF>100, 000 hours
Energy Saving: The efficiency of optic-electrical converting is up to 70%
Low Running Cost: No wearing part. Free maintaining, no need to adjust the laser path.
2.Parameters:
Electronic Components:
Resistance, capacitance, chips, printed circuit boards, computer keyboard.
Apparatus And Meter:
Panel signs, precision equipment, etc.,
Instrument:
Panel signs nameplates, precision equipment, etc.,
Hardware Tools:
Knives, tools, measuring tool, cutting tool, etc.,
Automobile Parts:
Pistons, piston rings, gears, shafts, bearings, clutch, lights, etc.,
Mechanical Parts:
Bearings, gears, standard parts, motors, etc.,
Daily Necessities:
Handicrafts, zipper, key holder, sanitary ware, etc.,
Laser Source
IPG Series:
Pulsed, High Energy Ytterbium Color Fiber Lasers
Color of Marking
Colorful
Mode of operation
Pulsed
Polarization:
random
Nominal average output power
10W
20W 30W 50W
Central emission wavelength:
1060-1070 nm, Q-switched operation Output power adjustment range 10%-100%
Emission Bandwidth (FWHM)
< 10 nm
Long-term average power instability
< 5%
Pulse width, (FWHM)
100 ns
Laser switching ON time
180 μ sec
Laser switching OFF time
180 μ sec
Pulse Repetition Rate* kHz
20-80kHz
Energy per pulse (PRR = 20 kHz)
0.95 mJ
Typical beam quality, M2
< 1.8
Output fiber delivery length
3m
Operating voltage:
220V
Max. Power consumption        :
600W
Dimensions:
215mm× 95mm× 286mm
Weight:Â
10kgs
Laser system
Scanning Speed:
0-7000mm/s
Marking Speed:
0-5000mm/s
Marking size:
110mm× 110mm (F-theta 160)
Spot size:
≤ 40 micron (F-theta 160)
Cooling unit:
Air cooled
Pilot laser:Â Â Â
650nm diode laser, visible red light for marking guide
Continuous working time:
≥ 16h
Humidity:
45~85% (no condensation)
Operating temperature:
0~40º C
Control units
CT-MARK (English Version
Note: Industry PC, Mouse and Monitor are not included in the quotation.
Customer can use your own computer or laptop to control it.
Â
1.Product Advantages:
Compact: The high-tech product, which is combined of laser device, computer, auto controller and precision machinery. It is small design and the complete weight is 22kg.
High Precision: Re-position precision is 0.002mm
High Speed: Imported scanning system makes the scanning speed is up to 7000mm/s
Easily Operating: Afford the specific marking software based on Windows, which is real-time adjust the laser power and pulse frequency. You can input and output by computer according to edit in the both of the specific marking software and the graphic software such as AutoCAD, CorelDRAW or Photoshop.
High Reliability: MTBF>100, 000 hours
Energy Saving: The efficiency of optic-electrical converting is up to 70%
Low Running Cost: No wearing part. Free maintaining, no need to adjust the laser path.
2.Parameters:
Electronic Components:
Resistance, capacitance, chips, printed circuit boards, computer keyboard.
Apparatus And Meter:
Panel signs, precision equipment, etc.,
Instrument:
Panel signs nameplates, precision equipment, etc.,
Hardware Tools:
Knives, tools, measuring tool, cutting tool, etc.,
Automobile Parts:
Pistons, piston rings, gears, shafts, bearings, clutch, lights, etc.,
Mechanical Parts:
Bearings, gears, standard parts, motors, etc.,
Daily Necessities:
Handicrafts, zipper, key holder, sanitary ware, etc.,
Laser Source
IPG Series:
Pulsed, High Energy Ytterbium Color Fiber Lasers
Color of Marking
Colorful
Mode of operation
Pulsed
Polarization:
random
Nominal average output power
10W
20W 30W 50W
Central emission wavelength:
1060-1070 nm, Q-switched operation Output power adjustment range 10%-100%
Emission Bandwidth (FWHM)
< 10 nm
Long-term average power instability
< 5%
Pulse width, (FWHM)
100 ns
Laser switching ON time
180 μ sec
Laser switching OFF time
180 μ sec
Pulse Repetition Rate* kHz
20-80kHz
Energy per pulse (PRR = 20 kHz)
0.95 mJ
Typical beam quality, M2
< 1.8
Output fiber delivery length
3m
Operating voltage:
220V
Max. Power consumption        :
600W
Dimensions:
215mm× 95mm× 286mm
Weight:Â
10kgs
Laser system
Scanning Speed:
0-7000mm/s
Marking Speed:
0-5000mm/s
Marking size:
110mm× 110mm (F-theta 160)
Spot size:
≤ 40 micron (F-theta 160)
Cooling unit:
Air cooled
Pilot laser:Â Â Â
650nm diode laser, visible red light for marking guide
Continuous working time:
≥ 16h
Humidity:
45~85% (no condensation)
Operating temperature:
0~40º C
Control units
CT-MARK (English Version
Note: Industry PC, Mouse and Monitor are not included in the quotation.
Customer can use your own computer or laptop to control it.
Â
Name Card Fiber Laser Marking System
Type: Optical Fiber Laser Marking Machine
Marking Method: Scanning Marking
Usage: Metal and Nonmetal
Engraving Machine Type: Fiber Laser Engraving Machine
Power: 10W 20W 30W 50W
Certification: SGS, Ce, ISO 9001 TUV FDA
Laser Source: Ipg Raycus Max Mopa
Working Size: 110*110mm
Voltage: 110-220V
Trademark: Perfect Laser
Transport Package: Wooden Case
Specification: ISO9000 & CE
Origin: China
HS Code: 8456100090
Type: Optical Fiber Laser Marking Machine
Marking Method: Scanning Marking
Usage: Metal and Nonmetal
Engraving Machine Type: Fiber Laser Engraving Machine
Power: 10W 20W 30W 50W
Certification: SGS, Ce, ISO 9001 TUV FDA
Laser Source: Ipg Raycus Max Mopa
Working Size: 110*110mm
Voltage: 110-220V
Trademark: Perfect Laser
Transport Package: Wooden Case
Specification: ISO9000 & CE
Origin: China
HS Code: 8456100090
Name Card fiber laser marking system
Name Card fiber laser marking system