Writable Self Adhesive Kraft Paper Tape No Pe Coated Tape,Coated Kraft Paper Gummed Tape,Writable Kraft Paper Gummed Tape,No Pe Coated Kraft Paper Tape JIANGMEN BAOGUAN ADHESIVE MATERIAL CO.,LTD , https://www.baoguantape.com
Second, the empty aircraft test run, to confirm the brakes, clutches, operators, appliances and other parts of the action is flexible, accurate and reliable, and make several empty trips to confirm whether its kinetic energy is good.
Third, recognize the rotation direction of the large-wheel motor, before starting the machine, is strictly prohibited. (In manual mode, you can manually reverse the return).
4. When the machine tool is working, it is not allowed to put two sheets at the same time. When punching small pieces, safety tools should be used. It is forbidden to overload the work. It is forbidden to work under the condition that the fuse is damaged. Do not remove guards and other protective devices.
5. It is forbidden to place the foot on the footboard when it is not working, and it is strictly forbidden to change the position of the part after the treadle is stepped on.
Six, mold installation should ensure that the mold center and machine center are the same.
7. If it is found that the machine tool is not working properly, it should immediately stop working, turn off the power supply, and then start troubleshooting after troubleshooting.
VIII. The machine tool will be filled with lubricant once within 2 hours of continuous operation.
Punch use safety procedures
1. Before starting the machine, lubricate the machine according to the lubrication diagram of the machine tool. Make sure the mold is installed reliably. Clear everything between the upper and lower molds.