Trimming and Stamping Die in New Style in China

1. Perfect tangent radius

2. Surface coating

3. ± 0.005 mm tolerances.

4. Competitive prices.
More introduction

    One of the screw-formed tools, trimming die is used to form the head or f screw. Square, hexagon and octangle are the common trimming die types.
    Trimming die is used to making hex or square head bolt to form the head shape. There are many kinds of material for choice like M2 or M35 etc. In order to extend the lifetime, surface Tin/TiALN-coated is considerable.
    Trimming dies are promptly used in industry to trim the heads of bolts & screws of different shapes by removing distorted, undesirable angular part and sizes of high precision. It leads to create innovative product of perfect sizes and precision without having process of unnecessary resizing that wastes not only money but time also leaving behind more wastage. We are highly in making these kind of high tech dies of best performance with very low and competitive rate.
   The manufacture of cutting and trimming dies with different profiles is carried on high precision grinding centres, high-speed machining centres, wire and electrode EDM and CNC lathes for hard lathing (steel and carbide)
based on Henghui's technology. The technical department will help selecting the most suitable steel or carbide tool for the material to be cut.

Please indicate the diameter & height and across flat when inquire or order. Or you can send us the drawing.

 

 Advantage 

Advice on carbide and steel grades for different applications.

Perfect tangent radius.

Mechanical Processing surfaces when it is geometrically possible.

Large number of shapes with very high geometric complexity.

Coating, the most suitable for the materials to be cut.

Mirror polishing before and after coating.

± 0.005 mm tolerances.

Competitive prices.

Products show




Packaging



 

1. Perfect tangent radius

2. Surface coating

3. ± 0.005 mm tolerances.

4. Competitive prices.
More introduction

    One of the screw-formed tools, trimming die is used to form the head or f screw. Square, hexagon and octangle are the common trimming die types.
    Trimming die is used to making hex or square head bolt to form the head shape. There are many kinds of material for choice like M2 or M35 etc. In order to extend the lifetime, surface Tin/TiALN-coated is considerable.
    Trimming dies are promptly used in industry to trim the heads of bolts & screws of different shapes by removing distorted, undesirable angular part and sizes of high precision. It leads to create innovative product of perfect sizes and precision without having process of unnecessary resizing that wastes not only money but time also leaving behind more wastage. We are highly in making these kind of high tech dies of best performance with very low and competitive rate.
   The manufacture of cutting and trimming dies with different profiles is carried on high precision grinding centres, high-speed machining centres, wire and electrode EDM and CNC lathes for hard lathing (steel and carbide)
based on Henghui's technology. The technical department will help selecting the most suitable steel or carbide tool for the material to be cut.

Please indicate the diameter & height and across flat when inquire or order. Or you can send us the drawing.

 

 Advantage 

Advice on carbide and steel grades for different applications.

Perfect tangent radius.

Mechanical Processing surfaces when it is geometrically possible.

Large number of shapes with very high geometric complexity.

Coating, the most suitable for the materials to be cut.

Mirror polishing before and after coating.

± 0.005 mm tolerances.

Competitive prices.

Products show




Packaging



 

The Multifunctional Hammer Mill is widely used in crushing various biomass wood waste and straw material. The motor and the hammers are directly connected by the coupling. There is no dead angle during the crushing so the finished product is very fine. The corners of the hammers are welded with high hardness material like carbon tungsten alloy. The welding layer thickness is around 3mm. The lifetime is 7- 8 times by normal 65Mn overall quenching hammer. The rotor has made the balance test and can work backward. It`s the best choice to prepare milled material for pellet machine.

Multifunctional Hammer Mill

Hammer Mill Machine,Wood Hammer Mill Machine,Multifunctional Hammer Mill,Multifunctional Hammer Mill

Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachinery.com