Baode GPHE condenser is tailored for vacuum condensation. The large vapor inlet connection is placed centrally on the top and the smaller condensate outlet on each side in the bottom. The two medium sized connections for cooling media are centrally placed in the middle, which gives it a symmetrical design.
Each type of condenser has its own unique application. Some determining factors include the size and the weight of the unit,weather conditions,location(city or rural),availability of electricity,and availability of water.
Evaporative condensers use water sprays and air flow to condense refrigerant vapors inside the tubes.The condensed refrigerant drains into a tank called a liquid receiver.Refrigerant subcooling can be accomplished by piping the liquid from the receiver back through the water sump where additional cooling reduces the liquid temperature even further.
Condenser,Semi Welded Condenser,Heat Exchanger Condenser Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodeexchanger.com
Wafer Type Butterfly Valve With Gear Operator
Body: Cast iron, Ductile iron Disc: Ductile iron, stainless steel 304/316, aluminum bronze, PTFE coating, nylon painting Sterm: CS, SS416, SS410, SS304, SS431 Seat: NBR, EPDM, PTFE Pressure: PN10, PN16
Casting Iron Valves:
Type: Butterfly valves, Gate valves, Check valves, Global valves, Y strainer
Size:DN40-1200 or 1.5-48' or above
Working Pressure: PN10/16/20/25,150LB-2500LB
Suitable temperature: Â -45c~150cÂ
Standard:
(1)Design and manufacture:DIN3352, BS5163,BS5150, ANSI B16.34, API600, API6D,API609,EN593,GB,T12238Â
(2)End connection: ANSI B 16.1,ASME B16.5, B16.47, B16.25, B16.34, JISB2212-JISB2214, DIN2543-2550,EN1092, AS2129, ISO 5211
(3)Wall thickness: API600, BS1868
(4)Face to face (end to end): EN 558, ASME B16.10, DIN3202, ISO5752, JIS,API609, MSS, BS5155
(5)Inspection and test: API598, EN12266-1, BS6755,API6D, ISO5208
Materialfor main parts:
(1)Body: CI, DI, WCB, ALB, CF8, CF8M
(2)Disc: DI, ALB, C95400, Rubber lined Disc, 1.2501, 1.4529, CF8M, CF8, Hastelloy
(3)Stem: SS416, SS410, SS304, SS431
(4)Seat: NR, Hypalon, EPDM, Neoprene, NBR, Wear-Resistant EPDM, Viton, Silicon, Heat-Resistant EPDM, WhiteNBR, WhiteEPDM,EPDM(NSF), PTFE
Coating: Fusion bonded epoxy coated
Connection type: Flanged type, Push-on type, Mechanical Joint type, Plain ends type
Sealing: Soft sealing or metal-to-metal seat, Flexible graphiteÂ
Operation: Manual, Pheunatic, Electric, Hydraulic and Pnewmatic-Hydraul
Appropriate medium: Air,water,sewage,steam,coal gas,oil
Packaging: Export polywood cases, or as per customers' requirements
Min Order Quantity: According to customer's requirement
Delivery Time: 30 days after order conformed
Payment: By T/T or L/C
Application: Fresh water, sewage, sea water, air, vapor, food, medicine, oils. acids, alkalis, salt etc.
Â
UL/FM Cast Iron Grooved End Butterfly Valve
Model NO.: HQCV
Work Pressure: Low Pressure (Pn<1.6mpa)
Working Temperature: Normal Temperature (-40°C<T<120°C)
Material of Seal Surface: Soft Sealed
Valve Body: Casting
Standard: ANSI, DIN, BS
Application: Industrial Usage
Size: Dn50-Dn350
Norminal Pressure: Pn1.0/1.6MPa
Mediums: Water. Oil, Gas
Temperature: -25~120c
Trademark: HQ
Transport Package: Packed in Wooden Cases
Specification: ISO
Origin: China
HS Code: 8481804090
Butterfly Valve: Worm gear wafter type butterfly valve, worm gear lugged butterfly valve, handle wafer butterfly valve, wafer metal seated butterfly valve, grooved end butterfly valve
There are several condensers to be considered when making a selection for installation.They are air-cooled, water-cooled, shell and tube, shell and coil, tube within a tube, and evaporative condensers.