·Those things related to cars in the Prime Minister’s report

On March 5, the third session of the 12th National People's Congress was opened. Premier Li Keqiang made a government work report. Many of them were related to the automobile industry. They demanded the future development of the automobile industry and showed their attitude. .
■ Vigorously adjust the industrial structure, focus on cultivating new growth points, accelerate the development of the service industry, and support the development of strategic emerging industries such as mobile Internet, integrated circuits, high-end equipment manufacturing, and new energy vehicles. Internet finance has sprung up everywhere, e-commerce, logistics express and other new The rapid growth of the industry, many “creatives” stand out, and the cultural and creative industries are booming. At the same time, continue to resolve excess capacity, and the annual tasks of eliminating backward production capacity in 15 key industries such as steel and cement were completed on schedule. Strengthening the management of smog and eliminating the indicators of yellow-label vehicles and old cars is overfulfilled.
â–  Improve oil product standards and quality Improve oil product standards and quality, and fully supply national V standard vehicle gasoline and diesel in key regions and key cities.
â–  Promote new energy vehicles to eliminate yellow-label vehicles to fight energy-saving emission reduction and environmental management. The carbon dioxide emission intensity should be reduced by more than 3.1%, the chemical oxygen demand and ammonia nitrogen emissions should be reduced by about 2%, and the sulfur dioxide and nitrogen oxide emissions should be reduced by 3% and 5% respectively. Promote new energy vehicles and control motor vehicle exhaust... The yellow label vehicles registered and operated before the end of 2005 must be eliminated.
â–  Deepen the state-owned enterprise reform of state-owned enterprises to accurately define the functions of different state-owned enterprises and promote reforms. Accelerate the pilot of state-owned capital investment companies and operating companies, build a market-oriented operation platform, and improve the efficiency of state-owned capital operations. Orderly implement state-owned enterprise mixed ownership reform, encourage and standardize investment projects to introduce non-state-owned capital shares.
â–  Accelerate the implementation of the go-out strategy to encourage enterprises to participate in overseas infrastructure construction and capacity cooperation, and promote the export of railway, power, communications, engineering machinery, and Chinese equipment such as automobiles, airplanes, and electronics to the world, and promote foreign investment in metallurgy and building materials industries.
â–  Build a new pattern of opening up to the outside world and promote the cooperation between the Silk Road Economic Belt and the 21st Century Maritime Silk Road. Accelerate the construction of interconnection, large customs clearance and international logistics channels; build economic corridors such as China, Pakistan, Bangladesh, China, Myanmar and Myanmar; expand inland and border opening, promote innovation and development of economic and technological development zones, and improve the development of border economic cooperation zones and cross-border economic cooperation zones Level; actively promote the construction of Shanghai, Guangdong, Tianjin, Fujian Pilot Free Trade Zone, promote mature experience in the country, and form a high-level reform and opening up.
■ Accelerate the cultivation of consumption growth points to encourage mass consumption and control the “three public” consumption. We will comprehensively promote the integration of “three networks”, accelerate the construction of fiber-optic networks, significantly increase the speed of broadband networks, develop logistics express, and encourage the emerging consumption of online and offline interaction with the Internet as the carrier. Establish and improve the quality and safety supervision, traceability and recall system of consumer goods, seriously investigate and deal with the production and sale of counterfeit and shoddy acts, and protect the legitimate rights and interests of consumers.
â–  The national high-speed ETC network basically realizes the highway electronic non-stop charging network in the country, making the traffic truly become the pioneer of development... Strengthening the construction of urban water supply and gas supply, public transportation, flood control and flood control facilities. Resolutely control urban diseases such as pollution and congestion, making travel more convenient and environmentally livable.
■ Promoting industrial structure to the middle and high-end manufacturing industry is our advantageous industry. It is necessary to implement "Made in China 2025", adhere to innovation-driven, intelligent transformation, strengthen foundation, and green development, and accelerate the transition from manufacturing power to manufacturing power. Take measures such as fiscal interest subsidies and accelerated depreciation to promote technological transformation of traditional industries. Adhere to the pressure to maintain, overcapacity, support mergers and acquisitions, and survive the fittest in market competition. Promote the deep integration of industrialization and informatization, develop and utilize technologies such as networking, digitization, and intelligence, and strive to seize opportunities in some key areas and achieve breakthroughs. The high-frequency words of the two sessions this year, in addition to the hot spots of environmental protection and people's livelihood, One more word - "new normal". As one of the pillar industries of the national economy, the automobile industry is also facing the challenges and opportunities under the “new normal”. After years of stabilizing the world's largest new car production and sales, China's car sales growth slowed from double digits to single digits; in more than 30 years, auto joint venture factories have blossomed everywhere, but the strategy of “market-for-technology” has been mixed; The prices of foreign-branded products continue to fall, Internet companies are eyeing, and the market share of local automakers is gradually shrinking... In the face of the new normal of the auto industry, local auto companies should continue to make new achievements in technological innovation, system reform, and international cooperation. Attitude, complete the move from a big car country to a car power.

Gantry Double Plasma Cutting Machine


We are involved in offering high-quality CNC Plasma Cutting Machine to our valuable customers. These products are made from high-quality components.Our company are prominent manufacturers and exporters of high-quality Auto Duct Forming and Cut to Length Machines. Offered products range consists of Auto Duct Forming Machine, Cut to Length Machine and Roll Former Machine. All offered products are manufactured under the direction of experts using quality tested material and latest technology as per industry norms. Sturdy designs, fine finish, high strength, long service life and damage resistance are features of our offered range of products.

Gantry double plasma CNC cutting machine is a stereotyped product carefully developed by our company. It has high processing efficiency and is 2.2 times of single gun cutting. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize cutting of any metal material according to any pattern. It is widely used in the cutting of sheet metal in various mechanical manufacture industry.

Type

BLDS-3060

BLDS-4080

BLDS-5080

BLDS-60100

BLDS-80100

Input power

AC380V/50Hz; AC220V/50Hz

Track gauge(mm)

3000

4035

5000

6000

8000

Effective cutting width(mm)

2300

3300

4300

5300

7300

Machine width(mm)

3500

4300

5500

6500

8500

Track length(mm)

6000

8000

8000

10000

10000

Number of cutting torch(set)

2

2

2

2

2

Lift(mm)

200

Cutting thickness(mm)

1~30(According to the power supply size)

Cutting speed (mm/min)

450~5000

Idle speed(mm/min)

0~8000

Drive mode

Bilateral drive

System

Shanghai Jiaoda or Beijing Starfire

Operating accurancy

±0.5mm



Cnc Plasma Cutting Machine,Cnc Full Mato Cutting Machine,Gantry Double Plasma Cnc Cutting Machine,Double Plasma Cnc Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com