CONTACT S&A
TEL:+86-20-89301885,
FAX:+86-20-84309967
SKYPE:
teyuchiller
Email:
Website: http://
Universal Exhaust Catalytic Converter is
installed in the automobile Exhaust System and is one of the most important gas
purification device. It can turn the harmful car exhaust such as carbon
monoxide (CO), hydrocarbon (HC) and nitrogen oxides (NOx) by redox reaction into harmless carbon dioxide
(CO2), water (H2O) and nitrogen (N2). Through this way, the car exhaust become
harmless to people and environment.
We produce high quality of Universal High
Performance Auto Engine Exhaust Catalytic Converter With competitive prices. We
maintain a well-organized and effective assembly line, starting from the
cordierite ceramic honeycomb-like substrate, applying wash-coat with
precious-metal (Platinum, Palladium and Rhodium) catalyst onto the surface area
inside the honeycomb substrate, and protect the finished product in metal
shells.
Feature
l Ceramic substrate 400 CPSI
l Metallic substrate 100 and 200 CPSI
l Euro Emission Standards
l According to customers` ratios
l Stainless Steel 304 or 409 outshells
Universal Catalytic Converter Universal Catalytic Converter,Performance Catalytic Converter,Diesel Catalytic Converter,Universal Exhaust Catalytic Converter JINING FAREAST LIANGFEI CONVERTER & MUFFLER CO. LTD , https://www.golbaltour.com
The troubleshooting of E2 alarm of S&A chiller CW-5200
E2 means over high water temperature alarm
When alarm occurs,the error code and the temperature will be alternately displayed
The alarm sound could be suspended by pressing any button
The fault case of E2 water temperature alarm as belows
1. Blocked
dust gauze and bad thermolysis,pls unpick and wash the dust gauze
regularly Or blow the dust on the condenser gap by air gun
2. Poor ventilation for air outlet and inlet
Remove obstacles for the chiller
Ensure a smooth ventilation for air outlet and inlet
3. Voltage is extremely low or unstable
Check the current and voltage
Improve the power supply circuit or use a voltage regulator
4. The setting parameter of controller is incorrect
Reset parameter or Restore to factory setting
5. Startup chiller frequently
Approach:
After startup chiller, pls ensure there is sufficient time for refrigeration (more than 5minuets)
6. Exessive heat load
Reduce the heat load
Or change another chiller with larger cooling capacity
If the chiller continues alarming
Pls feel free to contact S&A after-sales dept.
Thanks for using S&A chiller