Semi-Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Semi-continuous Waste Tyre Pyrolysis Plant Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
1. The measurement area is only 2mm/SPAN>3mm and can be used to measure relatively small leaves. The sample thickness can reach 1.2mm. The center line indicates the center of the measurement area.
2. Hold the sample clamp with your finger until a measurement of the chlorophyll meter “drops†appears on the display. The measured value is automatically stored in memory.
3. When using the chlorophyll meter directly under sunlight, use the body to cover the instrument so that it does not affect the measurement results.
4. Do not attempt to measure absolutely thick parts such as veins. If the measured leaf has many veins, the best way is to take several measurements and average.
5. If a series of “drips†and “---†are flashing on the display, the measurement procedure is performed incorrectly (the sample holder is not completely sealed, the sample holder is opened before the measurement is completed, or the sample is too Thick or too small).
6. If the measured value appears with a decimal point flash, no decimal point, or a measurement value greater than 50.0, the measurement accuracy cannot be guaranteed. Please measure again.
7. If the sample holder's emission or receiving window becomes dirty or there is some water, there will be no accurate measurement results. Please check whether the sample folder window is clean before measuring.
7 considerations for using the chlorophyll meter
Chlorophyll meter is very accurate in determining the chlorophyll content of the leaves. The function of the chlorophyll meter is very effective in the study of crop photosynthesis. As an instrument that can quickly measure chlorophyll content, the function is also relatively good, but there are still some problems in the operation, so when you use the chlorophyll meter to take measurements, you should pay attention to the following seven major issues to ensure the measurement results. accuracy: